2
1
3
1
2
3
2
1
3
4
5
6
7
2
1
3
2
1
3
1
2
M4
M4
Terms and conditions apply. Online registration only.
Register your manufacturers
guarantee online within
14 days of purchase at
www.registertoday.co.uk/sharp
and enter into a prize draw to
win a Sharp Soundbar
Connectivity
A
Ethernet/LAN*
Network connection
SAT IN
I
Satellite input
J
C
K
USB
D
USB 2.0 input x2
HDMI 4
L
HDMI input
E
M
HDMI 1
F
HDMI input (eARC)
TF Card in
N
TransFlash / micro SD Card input
HDMI 2
G
HDMI input
CI Card in
Common Interface module
AV IN
H
Audio/Video input
Earphones
Earphone output
Service Input
Input is used only by
service centres
Digital Audio
Digital Optical Audio Output
RF IN
RF / TV aerial input
HDMI 3
HDMI input
B
M
I
J
K
L
H
(mini)
N
B
C
D
E
F
G
A
4 First time installation
When the set fi rst turns on, it will ask you to select your preferred on-screen
display language. This will change the language in which the menus and
associated information is displayed in.
Basic installation steps are shown below. These may vary slightly depending on your model. Due to Android software updates, the look and feel of the TV start up
procedure and subsequent menus can be subject to chage.
Android Phone users
During the set-up process,
y
ou will be prompted to
sign-in to your Google account using your pre-installed
“Google” app. This set up process will depend upon
which model TV you are setting up. Please ensure you
have your account details to hand.
5
The Google Assistant
Using the Google Assistant with your voice
Remote controls with the Google Assistant have a Google Assistant dedicated button and a built-in
microphone. To use this feature with the Google Assistant remote control, follow the instructions
as below.
Before using the Google Assistant, you will need to pair the remote. Please follow step 5 of this
guide to pair your remote to enable the Google Assistant.
Press the button. The LED indicator on the remote control will illuminate.
Wait for the on-screen message from the Google Assistant, then speak into the microphone. A
good rule of thumb is to have the microphone positioned about 15-30 centimetres away from your
mouth.
By speaking into the microphone, you can search for various content or control your connected
smart home devices. Speech examples may be displayed on the television screen depending on
your model.
6
Pairing the remote
If during the fi rst time installation process the remote was not paired or skipped, then follow the process
below to pair your remote with the television.
Turn the set on.
Press the button on the remote control.
The pairing screen will appear on the TV.
Now press and hold the ”Left” and “Home” buttons on the remote simultaneously (highlighted).
The LED indicator on the remote control will start to fl ash.
Select the detected remote control shown on the screen and press OK.
Once paired the pairing screen will disappear.
This process will only need to be carried out if the remote is not paired. Once paired, when the button
is pressed it will open the Google Assistant screen on the set and activate voice functionality.
Connect the TV to your power socket.
If you wish to use the TV to receive Freeview/Saorview channels, connect the RF input from the TV
to your outdoor Digital TV aerial. If you do not wish to receive Freeview/Saorview, skip this step.
Connect to the internet. Ethernet provides the most stable connection.
Switch on the television by pressing the TV
control stick located on the TV set.
TV control stick
Insert the batteries supplied into the remote controls
and press the standby button to power on the TV.
TV Control Stick
Remote Control:
Installing Batteries
Wall Mounting the TV
Image for illustration only.
Remove the four screws that are supplied
in the wall mounting holes.
The wall mount can now be easily attached
to the mounting holes on the rear of the TV.
Install the wall mounting bracket to the
television as advised by the bracket
manufacturer.
The picture shows the use of spacers, which
are not applicable to all sets/installations.
For the dimensions of the VESA mounting,
please refer to the Technical Specifi cations
section of this document.
Press to navigate up
Press to confi rm a selection
Press to navigate right
Press to navigate left
Press to navigate down
Micr LED
Setting up the TV set for the fi rst time
Used for stand construction (fi g.1)
Construct the stand before installing onto
the TV. Use the 4 x
M4
screws supplied.
With the TV placed on a soft fl at surface, attach the
constructed stand using the 4x
M6
screws supplied
Fitting the stand
1
Note:
To complete the stand
installation you will require a
cross head screw driver.
The TV comes with the
following screws:
Used for attaching the constructed
stand to the TV (fi g. 2)
To obtain a copy of your Operating Instructions, please go to: https://www.umc-uk.co.uk/instruction-manuals/Sharp-Television_information.html
or use this QR code:
2 Connecting your set
3
Powering On the TV
x4 M4
x4 M6
M6
M6
M6
M6
