Sharp 34H-F200F, Руководство по обслуживанию, Страница: 3 / 68

3
3-1
3-2
34H-F200
34H-F200F
ADJUSTMENT PRECAUTIONS
Entering service mode (Method 1) 1. Send the service R/C code to enter the service mode. 2. Send it again to exit the service mode. (Method 2) 1. Short the jumper to enter the service mode. Connect "J 311" with "J 403". 2. Stop shorting the jumper to exit the service mode. Service mode menu 1. Select item by ch up/down ,push vol up/down. 2.
When y
o
u adjust geometr
y,
please set Full mode b
y "Wide mode k
e
y".
3.
About geometr
y adjustment, it is necessar
y to adjust 2 patter
n.
»
50hz interlace signal
»
60hz interlace signal
About "Reset
TV
-set"
1.
When replacing the flash R
OM or EEPR
OM, the
TV ma
y need to be reset.
2.
Unless necessar
y,
do not reset the
TV because the adjustment data will be
initialized. 3.
T
o
reset the
TV
, enter the "Reset
TV
-set" men
u and press the SURR
OUND k
e
y.
After about 30 seconds
, the NVM data will be initializ
ed.
Changing the NVM data 1. Enter the "NVM Edit" menu. 2.
Input the addr
. and data in he
x with the n
umber k
e
ys or v
ol up/do
wn k
e
y.
»
NVM-edit addr
. (he
x) ----
»
NVM-edit data (hex) --
MAIN (Wiring side)
Fig.1