E 25
Channel setting
Enables individual channel setting.
1
Press
MENU
to call MENU
screen.
2
Press
'
/
"
to select “CH-
SETTING”.
3
Press
ENTER
to display CH-
SETTING menu.
4
Press
'
/
"
to select desired
item.
5
Each time you press
\
/
|
, setting for individual items changes
as follows:
• POSITION:
The channel position changes to the next higher or lower number.
•
COLOUR:
•
SOUND:
•
SKIP:
ON
OFF
Channel numbers with a “ ” mark on the left are set to SKIP. To turn
off SKIP, press the number buttons to select the desired channel and
then set SKIP to “OFF”.
•
FINE:
The frequency changes to allow fine tuning.
•
NICAM:
ON
OFF
Select “ON” to receive NICAM stereo or bilingual sound signals. (See
37
for sound mode selection.) Select “OFF” to receive NICAM
mono signals.
•
A2:
ON
OFF
Select “ON” to receive A2 stereo or bilingual sound signals. (See
38
for sound mode selection.) Select “OFF” to receive mono signals.
• Switching COLOUR system:
Set the system to “AUTO” for normal TV reception. The AUTO mode automatically detects the received
signal system and changes the reception system of the TV set. When the picture is not stable, switching
to an appropriate system may improve the picture quality.
• In a weak reception area, or under bad reception conditions, you can change the frequency by Fine Tuning.
• When using Fine Tuning (FINE), the channel number changes from green to yellow.
• To return the channel to its original frequency setting, follow the manual channel tuning procedure. See
24
.
6
Press
MENU
until normal
screen appears.
• When you select AV1, AV2 or AV3 for the channel position, the CH-
SETTING menu changes as shown above and the VCR MODE
setting offers the following options:
VCR MODE:
1
2
Normally select “1”. Select “2” when using a deteriorated video tape.
B/G
I
D/K
M
MENU
P I CTURE
SOUND
FEATURE
T I MER
CH–SETT I NG
2
1
M
ON
A2
ON
D K
I NG
POS I T I O
CH–SETT
N
CH
7
COLOUR
A
SOUND
SK I P
OFF
UTO
F I NE
68 . 25MHz
N I CA
AV
DE
I NG
POS I T I O
CH–SETT
N
1
COLOUR
AUTO
VCR MO
1
AUTO
PAL
N443
SECAM
N358
• This product is designed to
automatically detect the
appropriate colour system.
However, when a VCR of NTSC
format is connected to AV-1,2
or 3 input terminal of this
product, if the output signal of
the VCR is switched between
channels, the screen image
may become black and white.
To solve this problem, select
“MENU/CH-SETTING” and then
“COLOUR” to switch the colour
system from “AUTO” to the
appropriate one (NTSC).
29H-F200RU(20-29)EN
11/6/04, 3:42 PM
25
Содержание 29H-F200RU
Страница 48: ...E 48 SHARP CORPORATION ...
