Sharp 28LW-92H, Руководство по эксплуатации, Страница: 4 / 37

- 3 -
Safety Precautions
This equipment complies with the requirements of Directives
89/336/EEC, 92/31/EEC and 73/23/EEC as amended by 93/
68/EEC.
This receiver should only be operated from a
220-240V AC,
50 Hz outlet. Ensure you select the correct voltage setting
for your convenience.
0DLQV6RFNHW2XWOHW
$&a9+]
To prevent fire or electrical shock, do not use the TV set in
an excessively damp place.
Position the TV set out of direct sunlight and away from heat,
as high temperatures can damage the cabinet, CRT, or other
electronic parts.
Do not cover ventilation slots with objects such as newspa-
pers, tablecloths, curtains, etc.
Do not cover the ventilation holes at the back of the TV set,
this can cause fire or other serious problems. Leave an ade-
quate open space behind the TV set for good ventilation.
In order to ensure that the television is properly ventilated,
leave a space of at least 10 cm around the set.
Do not install this equipment in a confined space such as a
bookcase or a built-in cabinet.
Television equipment and cart combination should be moved
with care. Quick stops, excessive force, and uneven surfaces
may cause the equipment and cart combination to overturn.
To prevent electrical shock, do not subject the AC power cord
to damage by bending or twisting it, or by placing heavy
items on top of it and do not place the AC power cord under
the TV set. If the AC power cord becomes damaged, unplug
it from the wall outlet immediately and call your dealer for
service.
Do not place this television equipment on an unstable cart,
stand, or table. The television equipment may fall, causing
serious injury to a child or an adult, and serious damage to
the equipment.
Use only with a cart or stand recommended by the manufac-
turer, or sold with the television equipment.
Never remove the back of the cabinet, as there is high volt-
age in the TV set.
Please call for service.
When replacement parts are required, be sure the service
technician has used replacement parts which are specified
by the manufacturer or have the same specifications as the
original one. Unauthorized substitutions may result in fire,
electrical shock, or other hazards.
Downloaded from: http://www.usersmanualguide.com/