Sharp 28LS-92EC, Руководство по эксплуатации

Страница: 12 / 27

- 11 -
%5,*+71(66
&2175$67
&2/285
6+$531(66
+8(
02'(
6725(
Mode
This item is used to change the picture size.
By pressing “ ” or “ ” button you may choose one of three
options. These are, “4:3”, “16:9” and “AUTO”.
•
4:3 This option forces the picture ratio to 4:3 mode.
• 16:9 This option forces the picture ratio to 16:9 mode.
• AUTO Your TV changes the picture mode automatically,
according to the transmission of the selected channel. For
example, your TV is 4:3 mode, but the transmission of that
channel is in 16:9 mode. If you select the AUTO mode, the
TV is switched to 16:9 mode automatically. If the TV is in
4:3 mode and the picture ratio of the channel is also 4:3,
there will be no affect selecting the picture mode to AUTO
mode.
WSS feature is only used in TV modes. For the Picture
Mode selection in AV1 the pin 8 (of Scart) value is used. In
RGB modes the Picture Mode can be 4:3 or 16:9 (Auto
mode is not available.).
%5,*+71(66
&2175$67
&2/285
6+$531(66
02'(
6725(
Note:
In the Picture menu if you press Flashback ( ) button the
adjustments switch themselves to the factory settings.
To Store the Settings
• Press “ ” or “ ” button on STORE option to store Picture
menu settings.
The stored picture mode setting will be valid only in current
program. However, the other stored values in Picture Menu
will be valid for all the programmes.
%5,*+71(66
&2175$67
&2/285
6+$531(66
02'(
6725( 2.
Feature Menu
• To enter the Feature menu directly, press the “ YELLOW ”
button, or
• Press “ M ” button, now you are in Main menu. In the Main
menu, select FEATURE using “ ” or “ ” button. Then en-
ter the Feature menu pressing “ ” or “ ” button.
6281'
3,&785(
)($785(
,167$//
352*5$0
Sleep Timer
As you enter the Feature menu, SLEEP TIMER will be the
first selected option. Use “ ” or “ ” button to change the
Sleep Timer values between OFF, 0:15:00, 0:30:00, 0:45:00,
1:00:00, 1:15:00, 1:30:00, 1:45:00 and 2:00:00 .
It is displayed on the upper right of the screen. If sleep timer
is activated it is displayed with the TV status and erased with
it after 3 seconds.
6/((37,0(5
&+,/'/2&.
/$1*8$*(
2))
2))
(1*/,6+
If there is left only one minute of the down counting of the
timer, it is displayed automatically on the upper left of the
screen, and stayed there until finishing. Then TV goes auto-
matically to stand-by.
Child Lock
You can use this feature to prevent children turning on TV or
changing programs or adjustments etc. without remote con-
trol.
The
CHILD LOCK feature can be set by “ ” or “ ” button to
either ON or OFF . When OFF is selected, there will be no
difference in the operation of your TV. When ON is selected,
the TV can only be controlled by the remote control handset.
In this case, the front panel buttons (except the Power On/
Off button) will not work.
6/((37,0(5
&+,/'/2&.
/$1*8$*(
2))
2))
(1*/,6+
Selecting Menu Language
Menu language can be chosen by pressing “ ” or “ ” button
on LANGUAGE item.
6/((37,0(5
&+,/'/2&.
/$1*8$*(
2))
2))
(1*/,6+
To Store Settings
In Feature menu all settings are stored automatically.
Installation Menu
• To enter the Installation menu directly, press the BLUE
button, or