Sharp 21J-FG1RU, Руководство по обслуживанию

Страница: 25 / 75

21J-FG1RU
3 – 22
10. PROTECTOR OPERATION CHECKING
11. A/V INPUT, OUTPUT & COMPONENT IN CHECKING
No. Adjustment point Adjustment procedure/conditions Waveform and others
BEAM 1) Receive "Monoscope Pattern" signal.
2) Set CONTRAST MAX.
3) Set BRIGHT MAX.
4) During the Collector & Emitter of
Q853/4/5
short,
make sure the protector ON and switch to standby
mode.
1 * Select one of Q853/4/5 to do
each short.
H, V PROTECTOR 1) Receive "Monoscope Pattern" signal.
2) Connect output of Bias Box to
D602 cathode
(C602 positive).
3) Set voltage of Bias Box to 18V and make sure
the protector is not working.
4) Set voltage of Bias Box to 27V , and make sure
the protector is working.
2
OTHER
PROTECTOR 1) Once finish rectified Electrolytic Capacitor short
testing in +B line, check all possible damaged
components on +B line.
(Use random selected set for inspection)
3
PROTECTOR
No. Adjustment point Adjustment procedure/conditions Waveform and others
1
2
3
1) Using the TV/VIDEO key on the remote control-
ler, make sure that the modes change in order of
TV, AV1, AV2 & TV again and the video & audio
output are according to the input terminal for
each mode.
1) Receive the "PAL Color Bar" signal (100%
White Color Bar, Sound 400 Hz 100% Mod).
2) Terminate the Video output with a 75 ohm
impedance.
Make sure the output is as specified
(1.0 Vp-p
±
3 dB) .
3) Terminate the Audio output with a 10K ohm
impedance.
Make sure the O/P is as specified
(1.5 Vp-p
±
3 dB) .
1) Connect YUV & Audio signal to Component In
terminal and Audio terminal.
2) Using the TV/VIDEO key on the remote
controler, press it until the modes change to
COMPONENT, confirm output is appear.
VIDEO AND
AUDIO INPUT
CHECK
COMPONENT IN
CHECK
VIDEO AND
AUDIO OUTPUT
CHECK