Sharp 21F-PA18, Руководство по обслуживанию

Страница: 9 / 89

21F-PD250 / 21F-PT220 / 21F-PA18 / 21F-PA18(B)
3 – 6
**AFTER INITIALIZED THE EEPROM (REFER TO FACTORY PRESETTING), READ DATA FROM
EEPROM ADDRESS 00H ~ 03H,AND COMPARE TO THE LIST BELOW, IF DIFFERENT,
INITIALIZE THE EEPROM.
ADDRESS DATA ADDRESS DATA
00H:
7CH
02H:
78H
01H:
70H
03H:
70H
*** There are four stages of service mode data. First stage data from V00~V32 (Adjustment Mode).
To go into second stage of service mode data, press MENU key.Second stage data from F01~F185(Setting Mode).
To go into third stage of service mode data, press MENU key.Third stage data is Check Mode.
To go into fourth stage of service mode data, press MENU key.Fourth stage data from O01~O37(Option Mode).
EEPROM ITEMS OSD DATA LENGTH INITIAL DATA FIX/ADJ/AUTO REMARK
R-DRIVE V00 0~127 63 ADJ
PLS REFER TO
B-DRIVE
V00 0~127 63 ADJ
ADJ ITEM FOR
R-CUT
V00 0~255 127 ADJ
SCREEN AND
G-CUT
V00 0~255 127 ADJ
WHITE BALANCE
B-CUT
V00 0~255 127 ADJ
RF-AGC
V01 0~127 50 AUTO
VIF-VCO
V02 0~63 31 AUTO
H-VCO
V03 0~7 3 AUTO
SUB-CON
V04 0~127 100 ADJ
SUB-COLOR V05 0~127 63 ADJ
SUB-BRIGHT V06 0~255 127 ADJ
SUB-TINT V07 0~127 63 ADJ
SUB-SHP PRE V08 0~63 43 *FIX BUS SETUP
SUB-COLOR-YUV V09 0~127 90 *FIX
SUB-TINT-YUV V10 0~127 63 FIX
V-SIZE
V11 0~63 38 ADJ
V-SHIFT
V12 0~7 3 ADJ
H-SHIFT
V13 0~31 9 ADJ
SCM-BR
V14 0~63 37 FIX
SCM-BB
V15 0~63 22 FIX
SUB-VOL
V16 0~60 60 FIX
V-SIZE60
V17 -31~0~+31 0 *FIX BUS SETUP
V-SHIFT60
V18 -7~0~+7 -1 *FIX BUS SETUP
H-SHIFT60 V19 -15~0~+15 +2 FIX
IF NECESSARY, ADJ
S-TRAP(BG) V20 0~127 64 AUTO
S-TRAP(I) V21 0~127 64 AUTO
S-TRAP(DK) V22 0~127 64 AUTO
S-TRAP(M) V23 0~127 64 AUTO
S-TRAP(574)
V24 0~127 64 AUTO
CUTOFF/BKGD YUV
V25
R-DRI YUV
V25
0…127 63
FIX
B-DRI YUV
V25
0…127 63
FIX
R-CUT YUV
V25
0…255 127
FIX NO FUNCTON
G-CUT YUV
V25
0…255 127
FIX NO FUNCTON
B-CUT YUV
V25
0…255 127
FIX NO FUNCTON
SUB-CON YUV
V26 0~127 100 FIX
SUB-BRIGHT YUV
V27 0~255 127 FIX
VS-CORRECT V28 0~63 32 *FIX BUS SETUP
VS-CORRECT_OFFSET V29 -13~+13 0 *FIX BUS SETUP
V LINEARITY V30 0~63 32 *FIX BUS SETUP
V LINEARITY_OFFSET V31 -13~+13 0 *FIX
BUS SETUP
SUB-SHP OV
V32 0~63 43 *FIX BUS SETUP
ADJUSTMENT MODE (FIRST STAGE)
To go into fifth stage of service mode data, press MENU key.Fifth stage data is NVM Edit Mode.
BUS SETUP