Sharp 21BM2GMK2, Руководство по обслуживанию

Страница: 10 / 36

10
10-1
10-2
21BM2GMK2
FUNCTION OPERA
TION CHECKING (VIDEO
AND AUDIO)
No.
Adjusting point
Adjusting procedure/conditions
W
aveform and others
CONTRAST key
1.
Receive "Monoscope Pattern" signal.
2.
Set P-Mode to select CONTRAST
.
3
.
Press V
olume Up/Down key to check whether the
CONTRAST
ef
fect is OK or not.
1
1.
Receive "Color Bar" signal.
2.
Set P-Mode to select COLOUR.
3
.
Press V
o
lume Up/Down key to check whether
the COLOUR ef
fect is OK or not.
2
COLOUR key BRIGHTNESS key
1.
Receive "Monoscope Pattern" signal.
2.
Set P-Mode to select BRIGHTNESS.
3
.
Press V
o
lume Up/Down key to check whether
the BRIGHTNESS ef
fect is OK or not.
3
TINT key
1
.
Receive the "NTSC Colour Bar" signal thru
AV
i
n
.
2.
Set P-Mode to select
TINT
.
3.
Press V
o
lume Up/Down key to check
TINT
, UP
for GREEN direction and DOWN for PURPLE di- rection whether is OK or not.
4
SHARPNESS Key
1.
Receive "Monoscope Pattern" signal.
2.
Set P-mode to select SHARPNESS.
3
.
Press V
o
lume Up/Down key to check whether
the SHARPNESS ef
fect is OK or not.
5
WHITE TEMP
1.
Receive "Monoscope Pattern" signal.
2.
Set FUNCTION to select WHITE
TEMP
.
3
.
Press V
olume Up/Down key to check WHITE
TEMP
Option, ST
ANDARD:
NORMAL
SETTING, W
A
RM for more REDDISH
direction changing, COOL for more BLUISH di- rection changing.
8
NORMAL Key
7
1
.
Once in PICTURE Mode, and theNORMAL key is pressed, all the settings will be present to nor- mal setting. (Normal setting value for every mode).
»
CONTRAST
: MAX
»
COLOUR
: CENTER
»
BRIGHTNESS
: CENTER
»
TINT
: CENTER
»
SHARPNESS
: CENTER
Notes:If nothing is display
mean contrast, colour
, bright,
tint, sharpness are all in nor- mal setting.
CH DISPLA
Y
COLOUR
1
.
All Ch (1~99) will have an OSD display of the channel number in green colour under
AFT
ON
condition.
6
FUNCTION OPERA
TION CHECKING (VIDEO
AND AUDIO)
(Continued)
No.
Adjusting point
Adjusting procedure/conditions
W
aveform and others
COLOUR SYSTEM
1
.
Receive the "P
AL
COLOUR BAR" signal, press
the COLOUR SYSTEM key to select modes ex- cept P
A
L, check the COLOUR is not working prop-
erly
.
Then, select the "P
AL" mode. Check again
its colour so that it is working properly
.
2
.
Receive "SECAM COLOUR BAR" signal, press COLOUR SYSTEM key to select modes except SECAM, check the COLOUR is not working prop- erly
.
Then, select the "SECAM" mode. Check
again its colour so that it is working properly
.
3
.
Receive "NTSC 4.43 " signal thru
A
V
, press COL-
OUR SYSTEM key to select modes except N4.43, check the COLOUR is not working properly
. Then,
select the "NTSC 4.43" mode. Check again its colour so that it is working properly
.
4
.
Receive "NTSC 4.43/3.58 COLOUR BAR" signal thru
A
V
, press COLOUR SYSTEM key to select
modes except N4.43/3.58, check the COLOUR is not working properly
.
Then, select the "NTSC
4.43/3.58" mode. Check again its colour so that it is working properly
.
9
OSD LAN- GUAGE QUANTITY CHECK
Check OSD LANGUAGE quantity and type as Eng- lish, Russian, Chinese, French,
Arabic and Malay
.
12
1.
Receive "P
AL
COLOUR BAR" signal.
2
.
T
urn up the volume control to maximum, make
sure the sound is heard from the speakers.
Then
put the unit in no signal state.
3.
Check the sound mute is ef
fective.
4.
Finally turn sound level of CTV to minimum.
SOUND SYSTEM
10
1
.
Receive "P
AL-D/K" signal, press the "SOUND
SYSTEM" to select B/G, I. Check the sound out- put is not working properly
. Select D/K and check
the sound output to make sure it is working prop- erly
.
2.
Receive "P
AL-I" signal, press the "SOUND SYS-
TEM" to select B/G, D/K. Check the sound output is not working properly
. Select I and check the
sound output to make sure it is working properly
.
3
.
Receive "P
AL-B/G" signal, press the "SOUND
SYSTEM"
to select I, D/K. Check the sound out-
put is not working properly
. Select B/G and check
the sound output to make sure it is working prop- erly
.
NOISE MUTE CHECKING
11