manualshive.com logo in svg

Sharp 1840TC-F, Инструкция и список запасных частей

Поделиться
Скачать
Sharp 1840TC-F Скачать руководство пользователя страница 31

-28-

3.4 LIFTING MACHINE
3.4.1 Transportation by crane (model TY-3480CNC/ TY-3880CNC/ TY-4280CNC
         Only)

Notice :

Only an authorized technician should be perform work with machine lifting.

1. 

Capacity of truck must be 3 tons at least.

2. 

Make sure there is no obstacle or personnel on the move, path and left  

3. 
    on the machine.

Keep machine’s balance and move slowly.

4. 
   We do not recommend lift and transportation machine by crane.   

  ---------------------------------------------------

                                                                                              Figure 2

3.5 PLACING THE MACHINE
Before placing the machine, 

fi

 x the adjusting screw on the base, makes machine

as close as possible to the 

fl

 oor and position of leveling pads in their most  

suitable place, increase the stability of machine.

Содержание 1840TC-F

















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды