X-TATIC SOUND CONTROL UNIT
X-TATIC SOUND CONTROL UNIT
6. Alternatively connect the single 3.5 mm jacks of any 5.1 head-
set to the SCU’s according analog plugs (instead of the
USB microphone cable the microphone is directly connected
to the soundcard). For a better distinction the connectors are
color coded.
7. Switch on the SCU and boot up your PC.
Note:
If you are facing any failures using the microphone function
via USB we recommend to check your operating system’s
audio settings and to define the soundcard as output device
and the USB microphone as input device.
8. Using the SCU with the
Xbox / Xbox 360
1. Connect the included power supply to a wall outlet and the
SCU’s ISO power connector.
2. Connect the optical cable (remove protective caps!) to the
optical audio output of your Xbox / Xbox 360 and the SCU’s
optical audio input.
3. Connect the X-Tatic to the SCU by plugging the headset
cable’s 9-pin connector to the SCU’s according 9-pin plug.
4. Connect the 2.5 mm microphone cable for Xbox 360 to the
respective 2.5 mm microphone input on the X-Tatic’s volume
controller and the controller of the game pad.
5. Connect the power supply delivered with the X-Tatic to a wall
outlet and the headset cable’s ISO power connector.
6. Switch on the SCU and the game pad.
7. From the Xbox 360’s settings menu (“System” > “Console
Settings” > “Audio” > “Digital Output”) select Dolby
Digital 5.1 as output format.
Note:
From the Xbox’s settings menu select Dolby Digital 5.1 as
output format.
ENGLISH
26
