USB LANPORT 100/400
5.3 USB server context menu
A – Invokes the server’s configuration window:
a – Define the USB server’s name
b – DHCP on (manual IP address off) / DHCP off
(manual
IP
address
on)
c – Decide which USB port(s) shall automatically be
mounted
at
program
start
d – “Set“ saves and activates your settings “Cancel“
discards
them
e – The entries “Backup Firmware“, “Firmware update“,
“Change password“ and “Server restart“ (see below)
B – Calls up the web interface (below 6.)
5.3.1 Backup firmware
The USB server offers the possibility to backup the firmware. The pop-up window already offers a target path
for the backup file. Via “Browse” you can change this default path. “Submit” starts the backup, “Cancel” will terminate
the action. In this input window you may assign a new password. This password is required to configure different
settings of the USB server.
5.3.2 Firmware update
In case you have a more actual version of the USB server’s firmware available you may update the current firmware
version via this entry. With “Browse” you select the locally saved update version. “Submit” starts, “Cancel” terminates
the update procedure. A current firmware version can be found at www.sharkoon.com.
5.3.3 Change password
In this input window you may assign a new password. This password is required to configure different settings of the
USB server.
5.3.4 Restart server
Select this entry to restart the USB server. A restart may be necessary when the server does not react or other problems have
occurred. You may also force a restart by pressing the reset button on the device.
A
B
6
b
a
c
d
e
Содержание USB LANPORT 100
Страница 1: ...USB LANPORT 100 400 Manual...
