Sharkoon SilentStorm SFX 500 Gold, Руководство пользователя, Страница: 12 / 13

SilentStorm SFX Gold 12

5.4 Connecting the cables to the power supply
Connect the modular cables to the power supply according to the connector coding (see above 4.1).
5.5 Checking all connections
Ensure that all devices are properly connected, then connect the power supply cable with the power
supply and a power outlet. Turn the power supply on using the on/off switch located on back. This
completes the installation of the power supply.
Note:
All connectors are fault-preventing designed to avoid misconnection. If you are unable to connect the
male connector-to-female connector of the drive or peripheral, please check if both connectors are
attached in the correct orientation. Do not force to plug the connectors within the incorrect
orientation, nor modify any of the components, as this will damage the power supply and other
hardware. SHARKOON guarantee does not cover damage cause by incorrect handling.
6. Troubleshooting
If the power supply does not work properly, check the following:
1. Is the power cable correctly connected to a wall outlet and the power supply’s power
connector?
2. Ensure that the on/off switch is in the “I” position.
3. Check if the main power connector is correctly plugged to the mainboard.
4. Check if the power connectors are properly connected to the peripheral devices, in case the short
circuit protection function was activated when switching on the power supply.
5. Turn the power switch “off” and then back “on” several times, with a minimum cycle of 5 seconds.
6. If the system still does not start, please contact support@sharkoon.com.
Power supply on/off switch