NIGHTFALL U3
12
fig. 11 fig. 12
(Carefully take out an optionally present metal bezel covering the 3.5" drive bay by using a
gripper.)
4. Slide the optical drive into the case’s drive bay (fig. 13).
fig. 13
5. Attach the optical device from both sides using the quick fasteners (fig. 14).
fig. 14 (Screws for 5.25" drive mounting)
3. Dismantle the 5.25" front bezel from the mounting bay in which you intend to install the
drive by loosening its screws and pushing the bezel to the inside (fig. 11). Remove the quick
fasteners (fig. 12).
Note:
If you intend to transport the case we recommend
securing (additionally) the installed drives:
6. Connect the optical drive to the power supply and the mainboard. (Put the front bezel back
onto the case.)
