sharkclean .com
sharkclean .com
NOTE:
All accessories are compatible with both the wand and the handle.
NOTE:
For deep carpet cleaning per ASTM F608 (embedded dirt in carpets), set to
MAX
suction and use setting
II
,
Carpet
.
WHOLE-HOME CLEANING
CLEANING MODES
To engage brushroll, place foot on floor
nozzle and tilt handle back.
Select surface setting:
O Power Off
I Hard Floor
For bare floors and small area rugs.
II
Carpet
For carpets.
WHAT DOES THE BRUSHROLL INDICATOR LIGHT MEAN?
Solid Green:
The brushroll is spinning and working as it should.
Solid Red:
There is a jam in the brushroll area. Turn your vacuum off, unplug from the wall and
remove any blockages in the nozzle.
Flashing Red:
The motorized floor nozzle is overheating. Turn your vacuum off and wait a
minimum of 45 minutes for it to cool down.
Press the
Wand Release
button to detach the
wand from the pod.
Press the
Handle Release
button to detach
the handle from the wand.
UPRIGHT
POWER/SURFACE SWITCH
INDICATOR LIGHT
ABOVE-FLOOR—WAND
ABOVE-FLOOR—HANDLE
Handle
WHOLE-HOME CLEANING
SETTINGS
BRUSHROLL INDICATOR LIGHT
Your Suction Control slider located on the top
of the handle allows you to adjust your suction
depending on your floor type.
MIN:
to reduce suction and increase
maneuverability on carpets.
MAX:
to increase suction on bare floors.
SUCTION CONTROL