background image

2

s h a r kc l e a n . my

This vacuum consists of a motorised 
nozzle, wand, and handheld vacuum. 
These components contain electrical 
connections, electrical wiring, and 
moving parts that potentially present 
risk to the user.

Before each use, carefully inspect 
all parts for any damage. If a part is 
damaged, discontinue use.

Use only identical replacement parts.

This vacuum contains no serviceable parts.

Use only as described in this manual. 

DO NOT

 use the vacuum for any  

purpose other than those described  
in this manual.

With the exception of the filters and dust 
cup, 

DO NOT

 expose any parts of the 

vacuum to water or other liquids.

DO NOT

 allow the appliance to be 

used by children. Keep the appliance 
and its cord out of reach of children. 
Do not allow to be used as a toy. Close 
supervision is necessary when used near 
children.  

GENERAL USE

This appliance can be used by persons 
with  reduced physical, sensory or 
mental capabilities or lack of experience 
and knowledge if they have been given 
supervision or instruction concerning 
use of the appliance in a safe way 
and understand the hazards involved. 
Cleaning and user maintenance shall  
not be done by children. 

Always turn off the vacuum before 
connecting or disconnecting any current 
carrying hoses, motorised nozzles, 
chargers, batteries, or other electrical  
or mechanical parts.

10 

DO NOT

 handle plug or vacuum with  

wet hands.

11 

DO NOT

 use without dust cup, filters, 

and brushroll in place.

12 

Only use Shark

®

 branded filters and 

accessories. Damage caused by non-
Shark filters and accessories may not be 
covered by the warranty.

13 

DO NOT

 put any objects into nozzle  

or accessory openings. 

DO NOT

 use  

with any opening blocked; keep free  
of dust, lint, hair, and anything that  
may reduce airflow.

14 

DO NOT

 use if nozzle or accessory 

airflow is restricted. If the air paths or  
the motorised floor nozzle become 
blocked, turn the vacuum off. Remove  
all obstructions before you turn on the 
unit again.

15 

Keep nozzle and all vacuum openings 
away from hair, face, fingers, uncovered 
feet, or loose clothing.

16 

DO NOT

 use if vacuum is not working as 

it should, or has been dropped, damaged, 
left outdoors, or dropped into water.

17 

Use extra care when cleaning on stairs.

18 

DO NOT

 leave the vacuum unattended 

while powered on. 
 
 

   WARNING 

REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, INJURY,  
OR PROPERTY DAMAGE:

IMPORTANT SAFETY INSTRUCTIONS

FOR HOUSEHOLD USE ONLY • PLEASE READ ALL INSTRUCTIONS 
BEFORE USING THIS VACUUM.

To reduce the risk of shock and unintended operation, turn off power 
and remove the Li-ion battery before servicing.

NOTE: If you have delicate or wool carpets, particularly loop pile, please try the 
vacuum on a hidden area first to ensure the spinning brushroll do not damage  
or unpick carpet fibres.

Содержание WANDVAC WS632SM Series

















Отзывы: