background image

2

TOLL FREE: 1-800-798-7398

    

WARNING:

TO REDUCE THE RISK OF ELECTRIC 
SHOCK OR INJURY DO NOT USE 
OUTDOORS OR ON WET SURFACES.

WHEN USING YOUR SHARK

®

 NAVIGATOR

 

UPRIGHT VACUUM, BASIC SAFETY 
PRECAUTIONS SHOULD ALWAYS BE  
FOLLOWED, INCLUDING THE FOLLOWING:

READ ALL INSTRUCTIONS BEFORE USING 
YOUR SHARK

®

 NAVIGATOR

 UPRIGHT 

VACUUM.

POLARIZED PLUG: 

This appliance has a polarized plug (one blade 
is wider than the other). As a safety feature, this 
plug will fit into a polarized outlet only one way. 

Do not force into the outlet or try to 
modify the plug to fit.

IMPORTANT SAFETY INSTRUCTIONS

For Household Use Only

WARNING:

TO REDUCE THE RISK OF FIRE, ELECTRIC 
SHOCK OR INJURY:

GENERAL ELECTRICAL SAFETY:

1.   Unplug from electrical outlet when not in use 

and before servicing.

2.  

DO NOT

 use vacuum with a damaged cord or 

plug.

3.  

DO NOT 

pull or carry vacuum by the cord.

4.  

DO NOT

 unplug by pulling on cord; to unplug, 

grasp the plug, not the cord. 

5.  

DO NOT

 handle plug or vacuum cleaner with 

wet hands.

6.  

DO NOT

 run the vacuum over the power cord.

7. 

DO NOT

 close a door on the cord.

8.  

DO NOT

 pull cord around sharp corners.

9.  

DO NOT 

leave appliance when plugged in.

10.  Keep power cord away from heated surfaces.
11.   Turn off all controls before plugging or 

unplugging vacuum cleaner.

12.   Always turn off this appliance before connecting 

or disconnecting the motorized nozzle.

HOSE ATTACHMENTS:

13.  

DO NOT 

use if air flow is restricted; if the air 

paths, the hose or the extension tube become 
blocked, turn the vacuum cleaner off. Remove 
all obstructions before you turn on the unit 
again.

14.  Keep the end of the hose, wands and other 

openings away from face and body.

15.    Keep rotating brush and suction openings away 

from hair, face, fingers, uncovered feet or loose 
clothing.

16.  Only use manufacturer’s recommended 

attachments.

UV410_26_IB_ENG_120229_5.indd   2

12-02-29   1:30 PM

Содержание UV410

















Отзывы: