4
1-800-798-7398
5
www.sharkninjamanuals.com
WARNING: Never use ordinary batteries for
replacement as these may leak and damage
your vacuum cleaner. Use only the battery
pack XB769N provided by EURO-PRO Operating
LLC for replacement. Call customer service
at 1 (800) 798-7398 or visit our web site
at www.sharkninjamanuals.com to order
replacement batteries.
CAUTION:
• Use ONLY with battery pack supplied. DO NOT
attempt to use non-rechargeable batteries.
• Do not attempt to remove the battery pack from
the unit to charge.
• Never throw the battery pack or the appliance
into a fire or incinerate it.
• Do not remove or damage the battery casing.
• Do not place the batteries on metal surfaces.
• Do not touch metal parts of the batteries
together as the batteries will overheat.
BATTERY PACK DISPOSAL AND REPLACEMENT
The cordless hand vacuum is powered by Ni-MH
batteries, which must be recycled or disposed of properly
in accordance with state, federal and local laws. If
uncertain as to how to remove the battery pack, we
suggest that you take your hand vacuum to a reputable
small appliance service technician to have this service
performed. Do not attempt to replace the batteries used
in this product with any other type of battery. Follow these
steps when replacement of the battery pack is required:
MAXIMIZING THE LIFE OF YOUR BATTERY
Call customer service at 1 (800) 798-7398 or visit our web site at
www.sharkninjamanuals.com to order replacement battery packs.
Technical Specifications
Battery
Shark Model Number
XB769N
Voltage
16.8 VDC
Type
Ni-MH
Weight
0.345 kg
Charger Adapter
Shark Model Number
XCA769IS
XCA769EU
XCA769UK
Manuf. Model Number
ZD6W240026EU1
ZD6W240026EU1
ZD6W240026BS1
Input Voltage
100-240 VAC
Output Voltage
24 VDC
Current
260 mA
Approximate Charge Time
6 hours
Weight
0.068 kg
VACUUM COMPONENTS
a
On/Off Switch
b
Charging Indicator Light
c
Dust Cup Release Button
d
Motor Housing
e
Dust Cup Container
f
Motorized Brush
g
Crevice Tool
h
Dusting Brush
i
Charging Stand
j
Charging Adapter- UK
k
Charging Adapter- EU and IS
ASSEMBLY
a
b
c
e
f
i
g
h
d
UK plug
j
k
EU plug
1 Using a #1 Phillips head screwdriver, remove the
single screw securing the battery compartment cover
located underneath the unit.
2 Use a flathead screwdriver to remove the battery
compartment cover. Never open the battery
compartment except to replace the battery pack. Set
the cover and the screw aside.
3 Slide the battery strap over and lift it out.
4 Carefully lift out the battery pack and disconnect the
terminals.
5 Before inserting the new battery, connect the
terminals to the battery pack taking care to connect
the black lead (-) to the negative connector first and
the red lead (+) to the positive connector second.
6 Insert the new battery inside the battery
compartment.
7 Take care to tuck the wiring completely in so
that the wiring does not interfere with the battery
compartment cover when it is replaced.
8 Replace the battery strap by pushing it in all the way.
The battery strap only goes in one way.
9 Replace the battery compartment cover. The holes
for the screw from the battery strap and battery
compartment cover must be aligned.
10 Replace the screw, making sure not to over-tighten it.
