Shark Stp-2015 Скачать руководство пользователя страница 8

8

STP SERIES PRESSURE WASHER  

OPERATOR’S MANUAL

Shark STP • 97-6153 • Rev. 7/03

HOW TO  USE THE
DETERGENT INJECTOR

WARNING: Some detergents may
be harmful if inhaled or ingested
causing severe nausea, fainting
or poisoning. The harmful ele-
ments may cause property dam-
age or severe injury.

The machine can siphon and mix de-
tergents with the use of Shark's de-
tergent injector kit.

1. Pull injector quick coupler collar back and secure on

discharge nipple. Injector valve body arrow should
point in direction of flow.

2. Connect high pressure hose to injector nipple se-

curing quick coupler.

3. Start machine as outlined in Operating Instructions.

4. Place detergent pick-up tube into container of deter-

gent solution.

5. Turn pressure control handle counterclockwise on

the variable pressure wand. This lowers the pres-
sure by directing the water flow through the soap
nozzle and allows the detergent injector to siphon
soap.

  6. Open  trigger  spray  gun.  Water  detergent  ratio  is

approximately 15 to 1.

  7. When  you  finish  washing,  rinse  by  simply  turning

the variable pressure wand control handle clockwise
to increase pressure.

NOTE:

 The detergent injector will not siphon with

water flowing through the high pressure nozzle at
the end of the wand.

8. For clean up, place detergent pick-up tube into con-

tainer of clear water and follow steps 5 and 8 to pre-
vent detergent deposits from damaging the injector.

WARNING

SOME DETERGENTS
MAY BE HARMFUL IF

INHALED OR

INGESTED.

Adjustable

Thermostat

Discharge Nipple

Detergent Injector

Injector Discharge Nipple

Collar

Variable Pressure

Control Handle

Quick Coupler

Trigger

Rupture Disk

Brass Soap

Nozzle

Variable Pressure

Wand (VP)

High Pressure

Hose

Spray Gun

Nozzle Quick

Coupler

Detergent

Pickup Tube

Содержание Stp-2015

























Отзывы: