Shark Steam Pocket Mop SE450, Руководство пользователя, Страница: 15 / 20

11 www.sharkclean.com
Troubleshooting Guide
PROBLEM POSSIBLE REASONS & SOLUTIONS
The Pro
Steam Pocket
®
Mop will not turn-on.
Your Steam Mop should be securely plugged into an electrical outlet only.
Check your fuse or breaker.
If your unit still does not work, call Customer Care at
1-800-798-7398 .
The unit will not make
steam.
Is there water in the water tank? If not, add water to your Steam Mop following
instructions on page 4.
If the unit still doesn’t make steam, follow the decalcification instructions on page
10.
Cannot select steam
setting/flashing blue light
remains on.
If you have already plugged in your unit, unplug and try a different outlet. This may
reset the standby mode.
Add water to the tank and press the ON/Standby button to select a steam setting.
If your unit still does not work, call Customer Care at
1-800-798-7398 .
The Pro
Steam Pocket
®
Mop leaves water on the
floor.
Check to see if your cleaning pocket is soaked through. We recommend you
unplug the Steam Mop and change the cleaning pocket.
Make sure the cleaning pocket is attached correctly.
The Pro Steam Pocket
®
Mop left a white spot on
the floor.
Do not leave your Steam Mop on the floor with a damp or wet cleaning
pocket.
If you’re using tap water we recommend switching to distilled water.
Make sure the cap is securely on the water tank.
Floors are cloudy, streaky or
spotty after steaming.
The cleaning pocket might be dirty. Flip or change the cleaning pocket.
If you washed the cleaning pocket with powder detergent, then it may be
damaged and require replacement. Replacement pockets are available at
www.sharkclean.com
.
You might have left the mop in the same spot for too long.
Do you have hard water? If you do, you might want to switch to distilled water.
This might be leftover from past cleaners used on the floor surface. Use the Steam
Mop a few more times and see if the leftover cloudiness is removed. If this does
not work, we suggest rinsing the floor with water, letting it dry, and then steam
mopping again with a clean pocket. One or more rinses generally removes the
residue. A more stubborn case may require you to rinse the floor with a mix of one
part vinegar and two parts water.
The Pro Steam Pocket
®
Mop is hard to push.
Make sure the cleaning pocket is attached correctly.
Check to see if the cleaning pocket is excessively dirty. If so, replace the cleaning
pocket.