background image

11. 

DO NOt

 unplug by pulling on 

power cord. To unplug, grasp 
the plug not the power cord. 
Do not use extension cords or 
outlets with inadequate current 
carrying capacity.

12. 

DO NOt

 put any objects into 

openings. Do not use with any 
opening blocked.

13. 

DO NOt

 put hands or feet under 

the steam mop as the unit gets 
very hot.

14.  Use 

ONLY

 on flat, stable 

horizontal surfaces. Do not use 
on walls, counters, windows, 
chairs or tables.

15. 

DO NOt

 use on leather, wax 

polished furniture or floors, 
synthetic fabrics, velvet or 
other delicate, steam sensitive 
materials.

16.  Liquid or steam must not be 

directed towards equipment 
containing electrical components, 
such as the interior of ovens.

17. 

DO NOt

 add cleaning solutions, 

scented perfumes, oils or any 
other chemicals to the water 
used in this appliance as this 
may damage the unit or make 
it unsafe for use.  If you live in a 
hard water area, we recommend 
using distilled water in your 
steam mop.

18.  When in use, 

NEVER

 turn 

the appliance over or on its 
side. 

NEVER DIRECt StEam 

tOWaRDS PEOPLE, aNImaLS 
OR PLaNtS.

19. 

NEVER LEaVE thE CLEaNING 
UNIt IN ONE SPOt ON aNY 
SURFaCE FOR aNY PERIOD OF 
tImE WhEN mICROFIBRE PaD IS 
attaChED. 

20. Carefully remove the microfibre 

pad immediately after you have 
unplugged and allowed the 
product to cool.

21.  When cleaning the steam mop, 

unplug the power cord from the 
electrical outlet and clean with a 
dry or damp cloth. Do not pour 
water or use alcohol, benzene or 
paint thinner on the unit. 

22  To reduce the risk of fire, 

DO NOt

 use a flammable or 

combustible liquid to clean a 
floor.

23. Extreme caution should be 

exercised when using this 
appliance to clean stairs.

24. Never use the steam mop 

without microfibre pad attached.

25. Keep your work area well lit.
26. Store steam mop indoors in a 

cool, dry place.

27.  To avoid circuit overload, do not 

operate another appliance on 
the same socket (circuit) as the 
steam cleaner.

28. If an extension cord is absolutely 

necessary, an extension cord 
rated a minimum of 15 ampere, 
14 gage cord should be used. 
Cords rated for less amperage 
may overheat. Care should be 
taken to arrange the cord so that 
it cannot be pulled or tripped 
over.

29. 

DO NOt

 leave unattended when 

the system is connected to a 
power supply or electrical outlet. 
Turn off all controls before 
unplugging the unit.

30. 

DO NOt

 store the unit with a 

damp or wet microfibre cleaning 
pad attached. 

 

WaRNING:

 Your steam 

mop is designed to clean 
hard floor surfaces that will 
withstand high heat. Do not use 
on unsealed wood or unglazed 
ceramic floors. On surfaces that 
have been treated with wax or 
some no wax floors, the sheen 
may be removed by the heat 
and steam action. It is always 
recommended to test an isolated 
area of the surface to be cleaned 
before proceeding. We also 
recommend that you check the 
use and care instructions from 
the floor manufacturer.

S3251NZ_11_ENG_IB_120613_4.indd   3

12-06-13   2:45 PM

Содержание SHARK STEAM LIGHT S3251NZ





















Отзывы: