Shark SC630SL, Руководство пользователя, Страница: 11 / 20

5
English
5
6
WEDGE CLEANING TOOL ASSEMBLY
5 Slide the wedge shaped cleaning
pocket over the wedge cleaning tool
frame until it is completely on.
6 Secure the cleaning pocket onto the
frame. Close the cinch by pulling
on the elastic band and sliding the
locking bean to tighten.
Cleaning Tip: The wedge cleaning
pocket was designed for cleaning a
variety of surfaces and is exceptional
on those that are large and flat, both
horizontal and vertical. Broad cleaning
sides and super absorbent microfibre
fabrics loosen, lift, and lock in dirt and
grime while sanitising at the same time.
to secure and press in and turn
counter clockwise to release
. Check
for proper connection by turning
the handle counter-clockwise a few
turns. The handle should remain
connected. (Note for reference:
This connection method is the
same design used with most over
the counter prescription bottles).
The design of this connection is to
prevent the hose from twisting and
kinking during use
.
Cleaning Tip: The wedge tip and
squared edges reach into tight areas
often missed or difficult to reach with
traditional cleaning methods. The
Wedge sides concave to wrap around
sink and faucet fixtures, door knobs, and
other small curved surfaces leaving them
clean all around. Multiple sides provide
more surface cleaning area and allow
one to clean with one side and finish
with the other for a “NOW YOU KNOW
THAT’S CLEAN” performance. Surface
examples for use are countertops,
tabletops, cabinets, walls, floor spot
cleaning, bathroom fixtures and more.
CAUTION: It is recommended that
you allow the cleaning pockets to
cool off before removing them from
the wedge or cylinder tools to avoid
possible scalding injury.