8
AUS sharkclean .com . au NZ sharkclean .co. nz
INTELLIGENT STEAM CONTROL™
The
Shark® Steam and Scrub Mop
has 3 unique Intelligent Steam Control settings so you can
select the ideal amount of steam to use for each cleaning task. In
DEEP MODE
, the pads will
spin faster and more steam will be produced. See below for tips on when to use each setting.
TO SANITISE*:
1
Attach clean Dirt Grip™ pads to the scrubbing nozzle.
2
Plug in the unit, tilt the mop handle down towards you, and press the mode button to select
the
DEEP
setting. The pads will then start spinning.
3
Wait 30 seconds for the unit to begin producing steam.
4
Start mopping with a forward and backward motion on an appropriate sealed hard floor
surface. After three minutes, your unit will be ready to sanitise.
5
Using a forward and backward motion, move the unit slowly and evenly over the area to be
sanitised while applying continuous downward pressure. Slowly repeat at least 8 times.
*Sanitisation studies were conducted under controlled test conditions. Household condi-
tions and results may vary. With scrubbing nozzle in DEEP mode.
SETTING
IDEAL FOR THESE
SEALED SURFACES
RECOMMENDED USAGE
LIGHT
Laminate
Hardwood
Vinyl
Cleaning delicate surfaces
Light cleaning and dusting
Loosening and lifting light dirt
NORMAL
Marble
Tile
Stone
Basic, everyday cleaning
Cleaning large areas
Cleaning moderate and heavy traffic areas
DEEP
Marble
Tile
Stone
Reaching hard-to-clean surfaces
Tough cleaning and removing stuck-on
messes and stains
Deep cleaning heavy traffic areas
Cutting through heavy dirt and grime
Sanitising* floors
