Shark S7001 Series, Руководство пользователя

Страница: 3 / 9

When assembling your steam mop there may be a little water in or around the water tank.
This is because we test all our steam mops before you buy them, so you get a quality
Shark
®
Steam & Scrub steam mop.
a Steam Mop Handle
b Quick-Release Cord Holder
c Steam Mop Body
d Mop Head
e Water Tank Lid
f Mode Button
g Dirt Grip® Soft Scrub Pads
h Filling Flask
STEAM MOP ASSEMBLY
1 Insert the mop handle into the steam mop
body until it clicks into place.
(fig. 1)
2 To attach the Dirt Grip Soft Scrub Pads,
place BOTH pads flat on the floor with the
plastic rings facing up. Align the indent
on the rotating discs on the bottom of
the mop head with the plastic rings on
the pads, then gently lower the mop head
onto the pads, pressing until the pads are
secured.
(fig. 2)
3
To open the water tank, pull the lid down.
(fig. 3) .
4 Use the filling flask to pour distilled water
into the tank
(fig. 4)
. Make sure to not
exceed the Max Fill line. When finished,
close the tank lid firmly.
fig. 1
a
b
h
c
e
g
f
d
fig. 2
fig. 4
fig. 3
sharkclean .com sharkclean .com
GETTING STARTED ASSEMBLING YOUR STEAM & SCRUB