background image

ADDITIONAL IMPORTANT SAFEGUARDS

TROUBLE SHOOTING

1.  To avoid circuit overload, 

do not

operate another appliance on the same electrical 

outlet (circuit) 

2.  If an extension cord is absolutely necessary, a 15 ampere 14 gage cord should be 

used.  Cords rated for less amperage may overheat.  Care should be taken to 
arrange cord so that it cannot be pulled or tripped over.

3.  

Do not

leave unattended when the system is connected to a power 

supply/electrical outlet.

PROBLEM POSSIBLE 

CAUSE POSSIBLE 

SOLUTION 

STEAM MOP WILL 

NOT OPERATE 

1.  Power cord not firmly 

plugged into outlet. 

2.  No power in wall outlet. 

3. Needs 

servicing. 

1.  Plug unit in firmly. 

2.  Check fuse or breaker.   

Replace fuse/reset 

breaker. 

3. Call 

1-800-798-7398. 

STEAM MOP WILL 

NOT MAKE STEAM 

1.  No water in water tank. 

1.  Add water to the water 

tank following instructions 

on page 5. 

STEAM MOP 

LEAVES WATER 

ON THE FLOOR 

1.  Micro-fiber cleaning cloth 

is too wet. 

2.  Unit is not level on the 

floor. 

1.  Turn off unit, unplug from 

power outlet and change 

the micro-fiber cleaning 

cloth. 

2.  Always keep the steam 

mop level and parallel to 

the floor. 

STEAM MOP LEFT 

WHITE SPOT ON 

FLOOR 

1.  Steam mop left in one 

spot too long. 

2.  Steam mop not rested on 

floor protector pad. 

3. Hard 

water. 

1.  Always place the steam 

mop on the floor 

protector pad when not in 

use. To remove, use a 

damp, dry cloth with a 

few drops of white 

vinegar and rub the stain 

to remove. 

2.  Always place the steam 

mop on the floor 

protector pad when not in 

use. 

3.  Use distilled water. 

FOR HOUSEHOLD USE ONLY

SAVE THESE INSTRUCTIONS

WARNING:

This appliance is equipped with a 
grounded-type 3-wire cord (3-prong 
plug).  This plug will only fit into an 
electrical outlet made for a 3-prong 
plug.  This is a safety feature.  If the 
plug should fail to fit the outlet, contact 
an electrician to replace the outlet.  Do 
not attempt to defeat the safety purpose 
of the grounding pin, part of the 
3-prong plug.

TO ORDER REPLACEMNT MICRO-FIBER 

CLOTHS

for Model S3305H

Call:1-866-98SHARK (1-866-987-4275)

Monday to Friday 8:30 A.M. - 5:00 P.M. Eastern Standard Time

or

visit our website: www.sharkvac.com

FOR TECHNICAL SUPPORT

for Model S3305H

Call.:   800-798-7398

Monday to Friday 8:30 A.M. - 5:00 P.M. Eastern Standard Time

2

7

Отзывы: