Shark Rotator Powered Lift-Away NV650 Series, Руководство пользователя

Страница: 10 / 40

sharkclean .com
CLEANING AND REPLACING THE FILTERS
Regularly clean and replace your filters to keep your vacuum's suction power optimal.
To clean filters, rinse with cold water ONLY to prevent damage from cleaning chemicals. Allow
all filters to air-dry for at least 24 hours before reinstalling them to prevent liquid from being
drawn into electric parts.
Pre-Motor (foam and felt):
With the dust cup removed, take out and
rinse the foam and felt filters with water.
Tap loose dirt off filters between washes
as needed.
CLEAN PRE-MOTOR FILTERS EVERY
3 MONTHS.
Post-Motor (HEPA):
To access the HEPA Filter , pull the latch
under the filter cover and take off the cover.
Take out the HEPA filter and rinse it.
CLEAN HEPA FILTER EVERY YEAR.
CLEANING FILTERS
IMPORTANT: DO NOT use soap when cleaning the filters.
NOTE:
To order replacement parts and filters, visit
sharkaccessories.com
.
Replacement
Pre-Motor Foam &
Felt Filter Kit
XFF650
Replacement
HEPA Filter
XHF650
Follow the previous instructions for removing filters. The pre-motor filters should be replaced every
2.5 years. The post-motor HEPA filter should be replaced every 3 years.
REPLACING FILTERS
HEPA
Felt Filter
Foam Filter
Filter Frame
Filter Access