Shark Rotator NV500NZV2, Руководство пользователя

Страница: 5 / 16

5
N Z : 0 8 0 0 0 0 2 9 9 9
UPRIGHT
CLEANING
ABOVE FLOOR
CLEANING
1
Press POWER to clean bare floor surfaces, area rugs or areas above-floor. The brushroll will not spin in this mode.
2 Press POWER and BRUSHROLL to clean carpets. The brushroll indicator lights will illuminate GREEN. If there is a jam, the indicator light on power nozzle will
illuminate RED. Refer to MAINTENANCE (page 10) for instructions on removing blockages.
3 Place your left foot gently on the power nozzle and tilt the handle back to start cleaning. Note: The brushroll will only spin once the vacuum is reclined back.
4 To clean with hose, press the WAND or HANDLE release button (depending on the amount of reach required) then lift handle up.
5 Insert wand or handle directly into desired tool.
6
Pivot back to release tool from accessory clip.
POWER
Bare floor or wand cleaning
POWER +
BRUSHROLL
Carpet cleaning
OR
CORRECT
INCORRECT
WARNING: When vacuuming fine dust (sawdust, sand, flour, talcum powder, etc.) electrostatic charges build up naturally. Under certain conditions
these electrostatic charges will be released. To avoid the unpleasant effects of static discharges, a metal strip has been incorporated into the right
side of the handle. PLEASE MAKE SURE THAT YOU KEEP YOUR HAND IN CONSTANT CONTACT WITH THIS METAL STRIP DURING VACUUMING.
1
2
3
4
4
5
6
OR
OR