Shark Rocket UV380 Series, Инструкция по эксплуатации

Страница: 8 / 11

13 14
sharkclean .com sharkclean .com
MAINTAINING YOUR VACUUM - Continued
CHECKING FOR BLOCKAGES
1
Remove the wand from the
handheld vacuum and check all
dust cup intake openings.
2 Remove the floor nozzle from the
wand and check the wand for
blockages.
3
Tilt neck of floor nozzle back to
straighten the airway. Remove
blockages.
TIP:
Ensure the brushroll garage
is completely sealed and closed
before using.
NOTE:
Heavy usage over time may
require minimal upkeep in order to
maintain your vacuum’s appearance.
2
Lift the brushroll out by the tab on
the left side. Use a pair of scissors to
carefully remove any string, hair or
debris that may be wrapped around
the brushroll.
2
Remove any string, carpet fibers or
hair that may be wrapped around
the Soft Roller. You can also tap
loose debris off the Soft Roller, or
wipe it clean with a dry towel. If you
see any fibers or hair buildup in the
teeth behind the Soft Roller, take a
dry towel and wipe it away.
Wash the Soft Roller as needed. Use
only water, and let air-dry completely
for at least 24 hours.
MAINTAINING THE BRUSHROLL
1
Press down on the two buttons
on the floor nozzle to pop up the
brushroll garage lid.
MAINTAINING THE SOFT ROLLER
1
Slide the Soft Roller access button
up to remove the Soft Roller.
3 To reinstall the brushroll, return it to
the brushroll garage. Press down on
the brushroll garage lid until it clicks
into place.
3
To reinstall the Soft Roller, press until
it clicks into place.