WHAT’S INSIDE:
POWER SETTINGS
LI-ION BATTERY
ASSEMBLY
For complete maintenance instructions, see the enclosed Owner's Guide.
For additional parts and accessories, visit
sharkaccessories.com
.
For additional batteries and charging accessories, visit
sharkclean.com/batteries
.
A
B
C
2
(Click)
1
(Click)
OFF
BARE FLOOR
SETTING
CARPET SETTING
BOOST MODE
Slide switch to the
top to turn off power.
To begin vacuuming
in
Standard Mode
,
slide switch to the
appropriate setting.
Bare Floor/Area Rugs
The brushroll spins slowly
to clean bare floors and
small area rugs.
Carpet
The brushroll spins
faster to pick up debris
below the surface
of your carpets.
For an added boost in
power, pull the
Trigger
on the handheld
vacuum. Release it
to return to standard
power.
NOTE:
For deep cleaning per ASTM F 608 (embedded dirt in carpets) please select the Carpet setting and pull the
trigger to go into Boost mode.
NOTE:
Select Carpet setting for stuck-on dirt and debris.
In Use
Full
Charge
Mid
Charge
Low
Charge
Nearly
Empty
No
Charge
Charging
Low
Charge
Mid
Charge
Nearly
Full
Full
Charge
NOTE:
Full charge takes approximately 3 hours.
CHARGING
Easily Insert or Remove
the Li-Ion Battery
To insert, slide the Li-Ion
Battery into the slot in
the back of the handheld
vacuum. To remove, press
and hold the
Battery
Release Button
then slide
out the Power Pack.
©2019 SharkNinja Operating LLC.
IN THE
VACUUM
OUT OF
THE VACUUM
BATTERY RELEASE
BUTTON
BATTERY
INDICATOR
LIGHTS
NOTE:
The battery comes
partially charged. Charge fully
before first use.
Battery Run Time
MODE
MINUTES
Hand Vac
40
Bare Floor/
Standard Mode
25
Carpet Mode
22
Boost Mode
(Hand Vac)
10
A
Handheld Vacuum
B
Dirt Engage™ Floor Nozzle
C
Wand
D
Pet Multi-Tool
E
8" Crevice Tool
F
Charger
G
Li-Ion Battery (Pre-Installed)
H
HEPA Post Motor Filter (Pre-Installed)
E
F
G
D
H
