Shark Rocket AH450ANZ, Инструкция по эксплуатации

Страница: 5 / 12

STEP 1
ASSEMBLY
IMPORTANT: Always inspect wires for damage
before assembly�
1
Insert the upper part of the Telescoping Wand
into the lower portion while pressing the
HEIGHT ADJUST button� Make sure not to
pinch the wires�
Push the two parts together until you hear
them click in place�
VACUUMING
STEP 1 STEP 2
OR
1 To adjust the height of the Telescoping
Wand, unwrap power cord, press on the
HEIGHT ADJUST button, and pull up to
increase height, or push down to decrease
height�
2 Stand the vacuum upright� Step on
the Motorized Floor Nozzle and pull
the Telescoping Wand back to start
vacuuming�
WHAT DOES THE BRUSHROLL INDICATOR LIGHT MEAN?
• Solid Green:
The brushroll is on and working as it should�
• Solid Red: There is a jam in the brushroll area� Turn your vacuum off and
remove the blockage�
• *Flashing Red:
The motorized floor nozzle is overheating� Turn your vacuum off
and wait for it to cool down�
*See Troubleshooting section for further instructions�
4
N Z : 0 8 0 0 0 0 2 9 9 9