sharkclean .com
sharkclean .com
EMPTYING THE DUST CUP
To remove
Dust Cup
, press the
Dust Cup
Release Button
and lift dust cup off the vacuum.
To reinstall, place bottom of dust cup into
pod and then tilt until it clicks into place.
To empty debris, press lower release button
and bottom of dust cup will drop open.
To remove collected debris from
Lint Screen
,
press top release button and lift handle to
open. Gently brush lint screen to clean.
CLEAN HEPA FILTER EVERY YEAR
To access the
HEPA Filter
, remove the floor
nozzle by pressing the
Floor Nozzle Button
on the side of the vacuum. To release the filter
frame, turn latch to the unlock symbol. Press
the tab on the HEPA filter to remove, then
rinse the filter with water. Be sure to let all
filters air-dry completely before reinstalling.
CLEAN PRE-MOTOR FILTERS
EVERY MONTH
Remove
Dust Cup
, then lift out
Filters
.
Tap loose dirt off filters between washes
as needed.
Regularly clean and replace the filters to keep your vacuum's suction power optimal.
To clean filters, rinse with cold water
ONLY
to prevent damage from cleaning chemicals. Allow
all filters to air-dry for at least 24 hours before reinstalling them to prevent liquid from being
drawn into electric parts.
CLEANING AND REPLACING THE FILTERS
CLEANING FILTERS
IMPORTANT:
DO NOT
use soap when cleaning the filters.
IMPORTANT:
Unplug the power cord before performing any maintenance.
FOAM
FILTER
FELT
FILTER
HEPA
NOTE:
To order replacement parts and filters, visit
sharkaccessories.com
.
Replacement
Pre-Motor Foam &
Felt Filter Kit
XFF450
Replacement
HEPA Filter
XHF450
Follow the previous instructions for removing filters. The
Pre-Motor Filter
should be replaced every
2.5 years. The
HEPA Filter
should be replaced every 3 years.
REPLACING FILTERS
