10
TOLL FREE: 1-800-396-9208
11
www.sharkclean.com
English
bottom of the bonnet to the
frame (
Fig. 3
). Then attach the
frame to the garment steamer
as described above (
Fig. 4
).
IMPORTANT:
Use caution
when changing the frames
when the unit is hot. The
frames are designed with a
steam guard around the bottom
to provide protection from heat
when placing or removing the
frames.
The small steam bonnet frame
must be attached at all times
during usage.
The frame should only be
removed for washing by hand,
if necessary (see page 13 for
care instructions).
Using the Press & Refresh
™
horizontally:
8
The Press & Refresh
™
can be
used to deodorize, sanitize, and
refresh upholstered items: sofa,
baby bedding, mattress, car
seat, drapes, and more.
9
Attach the upholstery/delicate
frame and upholstery steam
bonnet to the unit.
10
In a horizontal position, move
the steamer in a up and down
motion continuously over the
upholstered item.
CAUTION:
The Wrinkle Eraser
™
is hot. Use caution when
removing the frames. DO NOT
put your hands directly onto the
Wrinkle Eraser
™
.
WARNING:
Never steam any
article of clothing while it is
being worn.
Begin at the top of the garment
and move in a up and down
direction pressing the Wrinkle
Eraser
™
directly onto the fabric.
CAUTION:
Do not over tilt the
unit when steaming overhead.
CAUTION:
Do not hold the
unit in a fixed position on
delicate fabrics and upholstered
items.
5
You can use the hooks on either
side of the vertical press pad for a
larger pressing area.
6
When steaming lightweight
garments, the VELCRO
®
clips
can be used in place of a
hanger to attach a garment
directly to the pad.
7
When finished using the
garment steamer, turn the
appliance “O” and let it cool
before emptying the water tank
and removing the bonnets and
frames if necessary.
Using Your Press & Refresh
™
Attaching the accessories:
3
Choose your desired frame.
Using both hands, hold the
frame on either side. Attach
the top of the frame to the
unit above the Wrinkle Eraser
™
into the notch. Next, secure
the pointed end of the frame
around the bottom of the unit
and snap into place (
Fig. 2
).
When using the upholstery/
delicate fabric frame:
NOTE:
Remember, DO NOT use
the garment steamer without
the small steam bonnet in place
4
Attach the desired bonnet to
the frame, then attach the
frame to the unit. Pull either
side of the bonnet over the top
of the frame and secure the
Using the Press & Refresh
™
and
vertical press pad:
1
Hang the vertical press pad on
a door.
2
Hang the garment onto the
garment hook.
3
Once the selected attachment
is placed on the garment
steamer, turn the On/Off switch
to the “I” position, a blue LED
light will illuminate. It will take
approximately 1 minute for the
unit to heat up.
CAUTION:
The Wrinkle Eraser
™
is not controlled by the steam
trigger and is hot as long as the
unit is turned on.
4
Holding the garment steamer
in the vertical position with the
steam nozzle pointing away
from you,
press and hold the
steam trigger
for continuous
steam and begin steaming your
garments in a vertical motion.
Filling and refilling the water
reservoir:
1
Never fill the garment steamer
while it is plugged into an
electrical outlet.
2
Open the water cap and hold
the the garment steamer
horizontally with the Wrinkle
Eraser
™
parallel to the floor.
Using the filling flask provided
fill the water tank to the Max
Fill line. Be careful not to
overfill. Push the cap back into
place, making sure it closes
firmly (
Fig. 1
).
NOTE:
The water tank does not
have to be completely full for
the fabric steamer to generate
steam. However, make sure
that the water tank is at least
half way full for optimal results.
Practice makes perfect!
It takes time to master
the garment steaming
techniques.
For best results, tilt the
steamer forward slightly
and press the Wrinkle
Eraser™ directly on the
garment.
Hold the steam trigger
for continuous steam.
The steam will stop
emiting once you let
go of the button.
Wipe away condensation
from the frame with
extended use.
Fig. 1
Fig. 2
Fig. 4
Fig. 3
The seam on the frame must line up
with the seam on the unit for proper
use and safety. The frame will snap into
place, double check to make sure the
seams are aligned.
GS500CWN_11_IB_EF_100920.indd 10-11
20/09/10 9:36 AM
