11
sharkclean .co.uk
10
sharkclean .co.uk
NOTE:
All accessories are compatible with both the wand and the handle�
OPERATING THE VACUUM
CLEANING MODES
To engage brush-rolls, step on floor nozzle
and tilt handle back�
Press power button to turn on vacuum�
Please note the brush-rolls will not spin
until you have stepped on the floor nozzle
and tilted the handle back�
WHAT DOES THE BRUSH-ROLL INDICATOR LIGHT MEAN?
Solid Green:
The brush-rolls are spinning and working as they should�
Solid Red:
There is a jam in the brush-roll area� Turn off the vacuum and unplug it, then remove
any blockages in the nozzle�
Flashing Red:
The motorised floor nozzle is overheating� Turn off the vacuum, unplug it, and
remove any blockages� Let the vacuum cool down for at least 60 minutes before restarting�
See Troubleshooting section for more information�
Flashing Green:
The vacuum is operating in an environment that is either too hot or too cold�
This vacuum will only function properly in temperatures ranging from 32°F (0°C) to 104°F
(40°C)� Turn the vacuum off and adjust the room temperature� Once the temperature has
reached the operating range, turn the vacuum back on�
Press the
Wand Release
button to detach the
wand from the pod�
Thick Carpet & Area Rug Cleaning
Slide the surface switch to the top position
to select Thick Carpet/Area Rug�
Carpet & Low Pile Cleaning
Slide the surface switch to the middle position
to select Carpet/Low Pile to increase the
speed of the brush-rolls and to help remove
stuck-on dust and debris�
Hard Floor Cleaning
Slide the surface switch to the bottom
position to select Hard Floor�
With pod removed, press the
Wand Release
button to detach the wand from the floor
nozzle�
Press the
Handle Release
latch to detach the
handle from the wand�
Press the Powered
Lift-Away®
button to
detach the pod from the floor nozzle�
UPRIGHT
POWER SWITCH
INDICATOR LIGHT
ABOVE-FLOOR—HANDLE
POWERED LIFT-AWAY®
ABOVE-FLOOR—WAND
SURFACE
LIFT-AWAY®
OPERATING THE VACUUM
SETTINGS
BRUSH-ROLL INDICATOR LIGHT
