11
1- 8 0 0 -7 9 8 -7 3 9 8
4
5
POWER BUTTON
1
The POWER button turns the vacuum on.
SURFACE SELECTOR
2
Selecting the Hard Floor setting will stop the brushroll from spinning and allow you to clean bare floor and above floor surfaces with ease. Thick Carpet/Area Rug
and Carpet/Low Pile settings refer to the strength of the suction power. “Carpet/Low Pile” is the default carpet setting and gives you the greatest suction and deep
cleaning power. “Thick Carpet/Area Rug” deep cleans higher pile, thicker carpets, specialty carpets, and area rugs with less suction. If the vacuum is difficult to
push or pull on certain carpets or area rugs, you can either disengage the brush roll and use the suction only setting or switch the surface selector to Thick Carpet/
Area Rug mode.
CORD HOOKS
3
For quick cord access, rotate upper hook 180° and remove cord. Rotate it back for cord storage.
HEADLIGHTS
4
The Illuminozzle is designed to illuminate debris in dark areas, the headlights illuminate any time the power is on. The headlights are long-lasting and designed to
last the life of the vacuum.
The LED light on the Illuminator handle will enable you to see dark areas when using the handheld accessories.
FILTERS
5
Remember to clean your filters regularly under normal use. Also, for optimal performance, tap clean filters between washes as needed.
HELPFUL TIPS
Hard Floor
Carpet
Deep Carpet
1
3
2
