5
1- 8 0 0 -7 9 8 -7 3 9 8
UPRIGHT
CLEANING
WARNING: To reduce the risk of electric shock, unplug the unit before assembling, adding or removing attachments or converting modes.
WARNING: Always ensure the power is OFF (“O” position) before plugging and unplugging.
1
Press POWER and push the surface selector to THICK CARPET/AREA RUG for high piles, thick carpets, area rugs, and specialty carpets. This setting produces reduced
suction with the motorized brush roll. It is the best setting if the vacuum becomes difficult to push or pull due to high suction.
2
Press POWER and push the surface selector to CARPET/LOW PILE for low pile and normal carpet types. This is the default carpet setting and produces high suction
with the motorized brush roll.
3
Press POWER and push the surface selector to HARD FLOOR for hard floors and accessories. This setting produces high suction and turns off the motorized brush roll.
4
Place your left foot gently on the floor nozzle and tilt the handle back to start cleaning. Note: The motorized brushroll will only spin once the vacuum is reclined back.
Hard Floor
Carpet
Deep Carpet
4
2
Best setting for low pile carpet and normal carpet types. This is the default carpet setting and produces high suction
with the motorized brushroll.
Best setting for high piles, thick carpets, area rugs, and specialty carpets if the vacuum becomes difficult to push or
pull due to high suction. This setting produces low suction with the motorized brushroll.
Best setting for hard floors and the accessories. This setting produces high suction and turns off the motorized brushroll.
3
1
