18
NZ 0 8 0 0 112 6 60
17
AUS 1800 099 385
To keep your vacuum’s
suction power optimal, follow
these instructions. Make
sure unit is off and cord is
unplugged.
MAINTENANCE
RECOMMENDED
FILTER CLEANING
SCHEDULE:
Pre-Motor Filter Kit
(Foam & Felt)
XFF600
Clean every 3 months.
Post-Motor Filter
(HEPA)
XHF600
Clean once a year.
EMPTYING THE DUST CUP
1
Lift the dust cup off the
pod by pulling up on the
release latches on the
sides of the dust cup
handle.
2
Hold dust cup over a trash
bin and press the bottom
dust-cup release latch.
3
Press top dust-cup
release latch to access
dust screen and remove
built-up debris as required.
CLEANING THE FILTERS
1
Pre-Motor
(foam and felt):
With the dust cup
removed, take out the
foam and felt filters, and
rinse with water. Tap loose
dirt off filters between
washes as needed.
2
Post-Motor (HEPA):
To access the HEPA filter,
reach under the grill, pull
the latch forward, and
pull the grill away from
the vacuum. Remove and
rinse the HEPA filter.
STEP 1
STEP 2
STEP 3
WARNING: To reduce
the risk of shock and
unintended operation,
turn power off and
unplug unit before
servicing�
Hand wash with
water only to prevent
damage from
cleaning chemicals�
Allow ALL filters
to dry completely
before replacing
in the vacuum to
prevent liquid from
being drawn into
electric parts�
IMPORTANT:
Do not use
soap when cleaning the
HEPA filter.
HEPA
FELT FILTER
FOAM FILTER
FILTER FRAME