12
TOLL FREE:
1-800-798-7398
Maintenance
Resetting the Motor Thermostat
Your Shark
®
Upright Vacuum is
equipped with a protective Motor
Thermostat. If the motor should
overheat, the thermostat shuts off
the power.
To reset the Motor Thermostat:
Move the Power Button to the
“
O – Off
” position.
Unplug the vacuum.
Check for clogged hose or filter;
unclog hose and replace filter.
Refer to
Checking for Blockages
on page 11.
Wait 45 minutes for vacuum to cool;
then plug in the vacuum.
Turn the Power Switch to the
“
I – On
” position to start the
vacuum.
Note: if vacuum still does not start,
contact Customer Service at:
1-800-798-7398.
1
Cleaning the Pet Hair Power
Brush -
Slide locking latch (
A
) forward.
Gently tilt brush housing upward
to open.
IMPORTANT: DO NOT
force; it
will not open all the way.
Remove debris from turbine
wheel and air passage.
A
Ordering Replacement Parts
To order additional parts and
accessories, go to
www.sharkclean.com
or call
1-800-798-7398
.
PART
PART NO.
Super Stretch Hose
1114-FC
Dusting Brush &
Crevice Tool
1115-FC
Foam & Felt Filters
XF22
Turbo brush
1117-FC
Cleaning Wand
1116-FC
24"Crevice Tool
1124-FC
NV22L_IB_100603.indd 12
10-07-12 1:50 PM
