sharkclean .com
sharkclean .com
NOTE:
All accessories are compatible with both the wand and the handle.
WHOLE-HOME CLEANING
CLEANING MODES
To engage
Brushroll
, step on floor nozzle and
tilt handle back firmly. Press the Power/Surface
switch to the appropriate floor setting.
Select surface setting:
O Off
I Hard Floor
For bare floors and area rugs.
II
Carpet
For high pile carpets.
WHAT DOES THE BRUSHROLL INDICATOR LIGHT MEAN?
Solid Green:
The brushroll is spinning and working as intended.
Solid Red:
There is a jam in the brushroll area. Turn off the vacuum and unplug it, then remove
any blockages in the nozzle.
Flashing Red:
The motorized floor nozzle is overheating. Turn off the vacuum, unplug it, and
remove any blockages. Let the vacuum cool down for at least 60 minutes before restarting.
See Troubleshooting section for more information.
Press the
Wand Release
button and pull up
on the wand to detach it from the pod.
The
Suction Control Slider
located on the
handle allows you to adjust the suction
depending on the floor type.
MIN:
to reduce suction and increase
maneuverability on carpets.
MAX:
to increase suction on bare floors.
With pod removed, press the
Wand Release
button to detach
the wand from the pod.
Press the
Handle Release
button and pull up
on the handle to detach it from the wand.
In Lift-Away mode, you can clean with the handle and wand, or just the handle.
Press the
Lift-Away
button to
detach the pod from the floor
nozzle.
Min Max
UPRIGHT MODE
POWER/SURFACE SWITCH
INDICATOR LIGHT
ABOVE-FLOOR—HANDLE
LIFT-AWAY®
ABOVE-FLOOR—WAND
SUCTION CONTROL
LIFT-AWAY WITH WAND
Wand
Min Max
Wand
Lift-
Away
Handle
WHOLE-HOME CLEANING
SETTINGS
BRUSHROLL INDICATOR LIGHT
NOTE:
For deep carpet cleaning per ASTM F608 (embedded dirt in carpets), set to
MAX
suction and use setting
II
,
Carpet
.
NOTE:
The brushroll spins in both modes.
Press the
Handle Release
button
and pull up on the handle to
detach it from the wand.
LIFT-AWAY WITH HANDLE
Handle