sharkclean .com
sharkclean .com
ASSEMBLY
ASSEMBLY
1.
Place
Vacuum Pod
onto
Floor Nozzle Post
until it clicks into place. With vacuum
in the upright position, connect the
Nozzle Hose
from vacuum body to
Floor
Nozzle
. Push with a slight turning motion to create a snug fit.
2.
Slide
Handle Assembly
into the vacuum body. Align the hose holder on the
handle with the cord hooks on the back of the vacuum body. Secure handle
assembly in place with included nut and bolt.
3.
Insert the
Extension Wand
through the ring and into the top of the nozzle hose.
4.
Attach
Flexible Hose
:
a.
Insert hose into
Swivel Connector
until it clicks into place.
b.
Route hose through anti-tip hook to prevent vacuum from tipping
c.
Run hose over upper holder.
d.
Insert hose securely into top of extension wand.
5.
You can store cleaning tools on the
Accessory Post
on the back of the vacuum body..
For proper operation, ensure all parts are firmly clicked into place.
2
(Click)
1
3
4
a
C
b
d
NOTE:
The hose must be securely attached to the wand to enable suction to reach the floor nozzle.
NOTE:
There are a variety of accessories that are compatible with this vacuum series. The top flap of your box shows the
select accessories that are included with your model. For additional accessories, visit sharkaccessories.com
