sharkclean .com
sharkclean .com
NOTE:
All accessories are compatible with both the wand and the handle.
WHOLE-HOME CLEANING
CLEANING MODES
To engage brushroll, select Carpet mode,
then step on floor nozzle and tilt handle
back.
Press the red
Release Button
on the side of
the pod. Step on the floor nozzle and lift off
the pod.
With pod removed, press the
Wand Release
button to detach the wand from the pod.
Attach an accessory to the end of the wand.
With pod removed, press the
Handle Release
button to detach the handle from the wand.
Attach an accessory to the end of the handle.
UPRIGHT
LIFT-AWAY®
ABOVE FLOOR-HANDLE
ABOVE-FLOOR-WAND
EMPTYING THE DUST CUP
Undo the
Latches
on the sides of the dust
cup by lifting them up and out. Tilt the dust
cup and lift it off vacuum pod.
To reinstall, set the bottom of the dust cup
and tilt until dust cup clicks into place.
To empty debris into trash, press the lower
release button and the bottom lid will drop open.
To remove collected debris from
Lint Screen
,
press the top release button and lift the handle
to open. Gently brush lint screen to clean.
IMPORTANT:
Unplug the power cord before performing any maintenance.
Empty the dust cup each time you vacuum and periodically during cleaning,
when debris in the dust cup reaches the MAX fill line.