Shark NAVIGATOR LIFT-AWAY NV354Q Series, Руководство пользователя

Страница: 9 / 20

8 www.sharkclean.com
TO USE:
1 Rotate the cord release to quickly release the power
cord.
2
Secure the power cord in the cord hook (a) . (Fig. 10)
= Brush Roll ON
= Bare Floor
= OFF
3
Press the On/Off switch
(b)
to the “
I
” position to
vacuum bare floors (straight suction only) or to the
“
II ” position to engage the motorized floor brush (for
vacuuming carpets and rugs).
(Fig. 10)
IMPORTANT: The motorized brush indicator
light (c) will illuminate green when motorized
floor brush is on, or red if there is a blockage
or jam. (Fig. 11) This feature is designed to
protect your Lifetime Belt that powers your
motorized floor brush. See Checking for
Blockages on page 14.
4
Gently press the floor nozzle down with your foot
while you grasp the handle and tilt it back towards
you.
(Fig. 12)
NOTE: The rotating brush on the motorized floor
brush will not spin unless the nozzle is flat against
the floor and the handle is tilted back.
5
Due to the huge suction power of this vacuum,
it may become necessary at times to adjust the
suction release
(d)
on the handle.
(Fig. 11)
If the
vacuum seems difficult to push or pull or if it is lifting
up area rugs, adjust the suction release by rotating
the collar 90° counterclockwise to open the valve.
Rotate the collar clockwise to close the valve when
you need high suction and for vacuuming floors.
6
Empty dust cup after vacuuming and periodically
during use when it appears full. (See “Maintenance”
section for instructions.)
7
When you are finished vacuuming, turn the vacuum off.
Fig. 12 Fig. 11
c
Cord
Hook
Suction
Release Collar
d
a
b
Release suction
for easier push &
pull on high pile
carpets and area
rugs.