background image

8

TOLL FREE: 1-800-798-7398

Maintenance

For best results empty the Dust Cup 
Assembly after each use, as needed 
during prolonged usage or when it 
reaches the 

MAX

 fill line. 

DO NOT OVERFILL

.

Turn vacuum off before emptying.

To empty the Dust Cup:

1

   Grip carry handle and press 

the Dust Cup release button to 
remove.

2

  

Option A:

 For Quick Empty: 

Insert Dust Cup deep inside 
trash receptacle to contain dust 
and debris.

 

 Press the bottom Dust Cup 
release button; tap container 
gently to dislodge and release 
dust and debris.

 

Snap door in place.

 

 Important:

 If the Dust Cup 

Door does not swing open after 
pressing the release button, 
push the door open using the 
bottom door tabs.

CAUTION: 

Unplug the vacuum; failure to do 
so might result in electric shock.

3

  

Option B:

 For Allergy Sufferers: 

Wrap a trash bag around the 
Dust Cup leaving space at the 
bottom for the door to swing 
open.

 

 Locate the Dust Cup Door 
release button within the trash 
bag and press to release as you 
shake the dust cup to empty 
dust and debris.

 

Snap the bottom door in place.

  

Note:

 Option B can also be 

performed outside of the home 
to further minimize releasing 
dust back into the air. Carry just 
the Dust Cup and trash bag 
outside.

 

 Note:

 Some dust and debris 

may remain in the top of your 
dust cup on or near the metal 
screen. It is not necessary to 
completely remove this material 
before continuing to vacuum; 

Shark

®

 advanced cyclonic 

action will sweep the metal 
screen clean once you begin to 
refill your dust cup.

1

2

3

NV70_26_IB_E_130228_1.indd   8

13-02-28   1:48 PM

Содержание Navigator DLX NV70 26

















Отзывы: