5
www.sharkclean.com
IMPORTANT
: Do not use on unsealed wood
or unglazed ceramic floors. On surfaces that
have been treated with wax or some no wax
floors, the sheen may be removed by the heat
and steam action. It is always recommended to
test an isolated area of the surface to be cleaned
before proceeding. We recommend that you
check the use and care instructions from the
floor manufacturer.
NOTE:
To prolong the life of your Steam Mop, we
recommend using distilled water.
3
Use the lavender loop on the side of the cleaning
pad to slide the mop head into the pad pocket.
Then secure the quick fasteners on the top of the
pocket to lock in place. (
fig. 3
)
4
Snap the mop head into the mop body by lining
up the groove on the back of the mop body with
the groove on the back of the mop head. Push
until you hear it latch into place. (
fig. 4
)
5
Turn the water tank cap counter clockwise and
remove from the tank. (
fig. 5
)
Use the filling flask and pour water into the tank.
Do not overfill. Replace the cap on the water
tank. (
fig. 6
)
fig. 3
fig. 4
fig. 5
fig. 6
S3901_N_11_IB_E_120410_6.indd 5
12-04-10 11:33 AM
