9
AU
sharkclean .com . au
NZ
sharkclean .com . nz
AU
02 8 8 01 76 6 6
NZ
0 8 0 0 112 6 60
AFTER USE AND STORAGE
1
Unplug the cord from the outlet and place the Steam
Mop into the upright position. Let it cool.
2
To remove the Dirt Grip
™
pad, lift the Steam Mop
straight up by the handle until the mop head is
hanging straight down. Press the Release button on
the back of the Steam Mop body, and both sides of
the Klik n' Flip
®
Mop Head will drop open, releasing
the pad. Once the pad has been released, close
the mop head.
3
If the Klik n' Flip Mop Head is not attached to the
Steam Mop, the pad can still be removed. Press the
two red secondary pad release buttons located on
the sides of the mop head post to release the pad.
(fig. 12)
4
Empty the water tank before storing. To empty the
tank, hold the Steam Mop beside a sink. Open the
water tank lid, then lean the unit over the sink. Let
the water drain out, then close the lid.
5
To store the Steam Mop, wait until after it has cooled
and the steam has been released. Then remove the
Klik n' Flip Mop Head and hang the Steam Mop by its
handle on a large hook (not included).
(fig. 13)
6
Store the filling flask by attaching it to the top handle
pole of the Steam Mop.
Caring for Your Steam Pocket
®
Mop
DIRT GRIP PAD CARE INSTRUCTIONS
Care
Machine-wash the Dirt Grip pads separately with warm
water using liquid detergent.
NEVER USE BLEACH, POWDERED DETERGENT, OR
FABRIC SOFTENERS
as they may damage or leave
a coating on the Dirt Grip pads that will reduce their
cleaning performance and absorbency. Dirt Grip pads
should be line-dried or tumble-dried on a low setting, as
this will extend the life of the microfibre fabric.
(fig. 14)
Loose fibres can indicate wearing of the microfibre
fabric.
DO NOT
pull the loose fibres, as this can cause
the weave to come undone. Simply trim the loose fibres
with scissors.
(fig. 15)
Replacement Dirt Grip pads
For best cleaning results, we recommend replacing your
Dirt Grip pads every 3 to 4 months following normal use.
As with any fabric, dirt particles, grease, friction, and
repeated washing can cause the fibres to break down,
and you may notice an increase in the effort needed to
push or pull the Steam Mop.
You can purchase replacement Dirt Grip pads and
other accessories by calling AU 02 8801 7666 or
NZ 0800 112 660.
STEAM NOZZLE CARE
If you believe the main steam nozzle or the Steam
Blaster
™
nozzle is clogged, please Customer Care
AU 02 8801 7666 or NZ 0800 112 660.
fig. 13
fig. 12
fig. 14
fig. 15
