Shark KD450NZ, Руководство пользователя

Страница: 11 / 24

10 NZ: 0800 002 999
SPOT & STAIN CLEANING
Please note that not all carpets react to the Sonic
Duo
™
the same way. Some carpets will require
more time and cleaning solution than others.
Step 1:
1 Vacuum the stained or discoloured area to
remove any loose dirt, dust, or debris that may
have accumulated in your carpet.
Step 2:
2 Begin by pretreating the stain with the
Activating Pretreater Carpet Stain & Odour
Remover until the stain or discolouration is fully
saturated.
3 Let sit for 5-10 minutes.
4 Use a white cloth with a blunt object to blot up
the stain.
5 You will see the stain begin to transfer from the
carpet onto the white cloth.
6
Continue to use fresh areas of the white cloth as
you blot up more and more of the stain.
7
Never rub.
8 Repeat as necessary.
Frequently Asked Questions
Q. I noticed a rippling effect on the edges of my area
rugs – should I be concerned?
A. Wool rugs sometimes have a rippling effect
on the edges after cleaning. This rippling will
relax our after a few days of regular wear
and usage.
Q. After using the Low Moisture –No Rinse- Carpet
Cleaner, my carpet feels dry and crunchy – what
can I do?
A. If your carpets feel crunchy, you likely used
too much of the Low Moisture – No Rinse-
Carpet Cleaner. The dry crunchy feeling will
go away after a few days of normal wear
and usage. Another pass vacuuming should
also help break up the crunchy texture more
quickly. To avoid this from happening again,
we recommend using less solution on one
specific area or a less concentrated dilution.
Q. How can I remove tough stains?
A. Begin by treating the stain with the Activating
Pretreater until fully saturated. Let sit for 5-10
minutes. Next, use a white cloth with a blunt
object to blot up the stain. You will see the
stain transfer from the carpet onto the white
cloth. Continue to use fresh areas of the cloth
as you blot up more and more of the stain.
Never rub. Repeat as necessary.
fig. 20 fig. 21