MAINTENANCE
NOTE:
To order replacement parts and filters, visit
sharkclean.eu
.
If you run over a hard or sharp object or notice
a noise change while vacuuming, check for
blockages or objects caught in the brush-roll.
1.
Turn off the vacuum.
2.
Using a coin, turn locks anticlockwise to open,
then lift off cover to access brush-roll.
3.
Clear airway of blockages.
4.
Replace cover by sliding inserts into slots,
then pressing down firmly on all sides before
turning locks clockwise to close. There will be
an audible click once the locks are secured.
1.
Slide
Eject Roller
button forward.
2.
To remove
Soft Roller
, pull the tab on the right.
3.
Tap loose debris off the Soft Roller. Use a dry
towel to wipe clean, or to remove any hair or
fibres caught in the teeth behind the Soft Roller.
4.
Rinse as needed. Use
ONLY
lukewarm water,
and leave to air-dry completely for at least
24 hours.
5.
When dry, insert the left end of the roller first,
then push the right end into place with the
word
Front
facing forward.
SOFT ROLLER
CLEANING OR REPLACING BRUSH-ROLLS
MAINTENANCE
CHECKING FOR BLOCKAGES
Detach hose from vacuum pod,
and check opening on back of
pod for blockages.
Detach wand from floor nozzle
and handle, and check both
ends of wand for blockages.
Detach handle from wand and
hose from the vacuum pod, and
check openings for blockages.
Detach dust cup from vacuum
pod. Empty dust cup, remove
debris from lint screen, and
check for blockages.
Detach wand from floor
nozzle. Tilt nozzle neck back
to straighten the airway, and
remove any blockages.
NOTE:
Turn off vacuum and remove battery before checking for blockages
IMPORTANT:
DO NOT
use sharp or metal objects to clear blockages.
BRUSH-ROLL
TURN LOCKS
LIFT COVER
ENGLISH
49
s h a r kc l e a n . e u
48
s h a r kc l e a n . e u
Содержание ICZ160EU Series
Страница 92: ...SVENSKA 183 sharkclean eu 182 sharkclean eu...