20
NZ : 0 8 0 0 0 02 9 9 9
MAINTAINING THE SOFT ROLLER
1
Slide the Soft Roller access button up to
remove the Soft Roller.
2
Use the onboard hair removal tool to
remove any string, carpet fibers or hair that
may be wrapped around the Soft Roller.
The tool is located in a compartment on the
nozzle, above the brushroll. You can also
tap loose debris off the Soft Roller, or wipe it
clean with a dry towel. If you see any fibers
or hair buildup in the teeth behind the Soft
Roller, take a dry towel and wipe it away.
3
Wash the Soft Roller as needed. Use only
water, and let air-dry completely for at least
24 hours.
4
Reinsert the Soft Roller by sliding it into the
front of the nozzle until it clicks into place.
CHECKING FOR BLOCKAGES:
HANDHELD, WAND, AND FLOOR NOZZLE
1
Remove the wand from the handheld
portion and check all dust cup intake
openings.
2
Remove the floor nozzle from the wand
and check the wand for blockages.
3
Tilt neck of floor nozzle back to straighten
the airway. Remove blockages.
