Shark HPB HPB-2011 Скачать руководство пользователя страница 5

HOT WATER PRESSURE WASHER  

OPERATOR’S MANUAL

5

97-6131, 97-6140  •  Rev. 3/04

INTRODUCTION

Thank you for purchasing a hot water pressure washer.

This manual covers the operation and maintenance
of the Mini Series, Junior Series, and Senior Series of
this pressure washer. All information in this manual is
based on the latest product information available at the
time of printing.

We reserve the right to make changes at any time with-
out incurring any obligation.

Owner/User Responsibility:

The owner and/or user must have an understanding of
the manufacturer’s operating instructions and warnings
before using this pressure washer. Warning information
should be emphasized and understood. If the operator is
not fluent in English, the manufacturer’s instructions and
warnings shall be read to and discussed with the opera-
tor in the operator’s native language by the purchaser/
owner, making sure that the operator comprehends its
contents.

Owner and/or user must study and maintain for future
reference the manufacturers’ instructions.

This manual should be considered a permanent
part of the machine and should remain with it
if machine is resold.

When ordering parts, please specify model and
serial number.

IMPORTANT SAFETY
INFORMATION

CAUTION: To reduce the risk of in-
jury, read operating instructions
carefully before using.

1. Read the owner's manual thor-

oughly.  Failure to follow instruc-
tions could cause malfunction
of the machine and result in
death, serious bodily injury and/
or property damage.

 2. All installations must comply with local codes. Con-

tact your electrician, plumber, utility company or the
selling distributor for specific details.

To comply with National Electrical Code (NGPA 70)
and provide additional protection from risk of electric
shock, this hot water converter is equipped with a
UL approved ground fault circuit interrupter (GFCI)
power cord.

WARNING

KEEP WATER SPRAY

AWAY FROM

ELECTRICAL WIRING.

WARNING

RISK OF FIRE.

DO NOT USE WITH

FLAMMABLE LIQUIDS.

WARNING

HIGH PRESSURE

SPRAY CAN PIERCE

SKIN AND TISSUES.

WARNING: Flammable liquids can
create fumes which can ignite
causing property damage or se-
vere injury.

WARNING: Do not use gasoline,
crankcase drainings or oil con-
taining gasoline, solvents or alco-
hol. Doing so will result in fire
and/or explosion.

WARNING: Do not spray flammable liquids. Operate
only where an open torch is permitted.

3. This fuel burning machine shall be installed only in

locations where combustible dusts and flammable
gases or vapors are not present.

4. In these oil burning models, use only kerosene, No.1

home heating fuel, or diesel fuel.

WARNING: Keep water spray, wand
and high pressure hose away from
electrical wiring or fatal electric
shock may result. Read warning
tag on electrical cord.

5. To protect the operator from

electrical shock, the machine
must be electrically grounded.
It is the responsibility of the
owner to connect this machine

to a UL grounded receptacle of proper voltage and
amperage ratings. Do not spray water on or near elec-
trical components. Do not touch machine with wet
hands or while standing in water. Always disconnect
power before servicing.

CAUTION: Spray gun kicks back — hold with both
hands.

  6. Grip cleaning wand of attached pressure washer se-

curely with both hands before starting cleaner. Fail-
ure to do this could result in injury from a whipping
wand.

WARNING: High pressure stream
of fluid that this equipment can
produce can pierce the skin and
its underlying tissues, leading to
serious injury and possible am-
putation.

7. High pressure developed by the

attached pressure washer can
cause bodily injury or damage.

Use caution when operating. Do not point the spray
gun at anyone or at any part of the body. This ma-
chine is to be used only by qualified operators.

8. Never make adjustments on machine while it is in

operation.

READ OPERATOR’S

MANUAL THOROUGHLY

PRIOR TO USE.

CAUTION

Содержание HPB HPB-2011











































Отзывы: