DVD
-SH02 King
36
PREFERENCES
Preferences allow you to set the default TV TYPE,
VIDEO OUTPUT, AUDIO, SUBTITLE, DISC MENU, PA-
RENTAL, PASSWORD, factory DEFAULTS and SMART-
NAVI of this player. This setting is only available when the
DVD player is in the STOP mode by pressing the [
STOP
]
button twice and then press the [
SETUP
] button to call on
the “GENERAL PAGE” fore selection settings.
NOTES
:
Pressing the [
STOP
] button once only pause the playback,
to stop the playback completely by pressing [
STOP
] twice.
TV TYPE
–
MULTI
- The DVD player will choose the correct
system to display the playback of inserted disc.
–
NTSC
- The DVD player will output in NTSC format
regardless of what format the disc was designed for.
–
PAL
- The DVD player will output in PAL format re-
gardless of what format the disc was designed for.
Note
: Press [N/P] directly on the Remote Control to alter
NTSC, PAL or MULTI of TV System being played.
VIDEO OUTPUT
The TV OUTPUT has three kinds of output ways; they
are VIDEO, S-VIDEO and SCART. If you are using S-vi-
deo output, please set this setting to “S-VIDEO”. If you are
using SCART output set to “SCART”, which matches with
your TV’s SCART input.
NOTES
: SCART output and S-Video output cannot be
used simultaneously.
AUDIO
This unit supports three audio selections, as shown
below, for your preferred audio setting.
SUBTITLE
This unit supports three subtitle selections, as shown
below, for your preferred default subtitle setting. When
“OFF” is selected, there will be no subtitle is displayed du-
ring playback.