15
16
sharkclean .co.uk
sharkclean .co.uk
To keep your vacuum’s
suction power optimal,
follow these instructions.
Make sure unit is off and
cord is unplugged.
MAINTENANCE
RECOMMENDED
FILTER CLEANING
SCHEDULE:
Pre-Motor Filter Kit
(Foam & Felt)
Clean every 3 months.
Post-Motor Filter
Clean once a year.
EMPTYING THE DUST CUP
1
Pull up on dust-cup
release latch and lift
dust cup off pod.
2
Hold dust cup over
a trash bin and press
the bottom dust-cup
empty latch.
STEP 1
STEP 2
WARNING: To reduce
the risk of shock and
unintended operation,
turn power off and
unplug unit before
servicing�
Hand wash with
water only to prevent
damage from
cleaning chemicals�
Allow ALL filters
to dry completely
before replacing
in the vacuum to
prevent liquid from
being drawn into
electric parts�
IMPORTANT:
Do not
use soap when cleaning
the filter.
3
Press top dust-cup
empty latch to access
dust screen and
remove built-up debris
as required.
CLEANING THE FILTERS
1
Pre-Motor
(foam and felt):
With the dust cup
removed, take out the
foam and felt filters,
and rinse with water.
Tap loose dirt off
filters between washes
as needed.
2
Post-Motor:
To access the filter,
reach under the grill,
press the button, and
pull the grill away from
the vacuum.
To remove the
Pre-motor filter, simply
pull black foam out
from frame. Rinse both
filters and allow to air
dry completely before
replacing. Hand wash
only. Replace foam
back into the filter
frame and make sure
edges are tucked into
the frame then insert
back into vacuum.
STEP 3
FELT FILTER
FOAM FILTER
FILTER FRAME
Filter Access
POST MOTOR FILTER
PRE-MOTOR
POST-MOTOR
NOTE:
To remove the post-motor foam
filter, pull out from frame.
