15
16
0800 862 0453
s h a r kc l e a n . e u
CAUTION:
Hand
wash filters only with
lukewarm water to
prevent damage from
cleaning chemicals.
Allow ALL filters to air-
dry completely before
replacing them in the
vacuum to prevent liquid
from being drawn into
electric parts.
CAUTION:
Turn off
power and remove
power pack before
servicing.
IMPORTANT:
Clean the
dust screen inside the dust
cup as required.
DO NOT
use soap when cleaning
the HEPA filter.
NOTE:
Empty dust cup when
debris reaches the MAX fill line.
MAINTAINING YOUR VACUUM CLEANER
EMPTYING THE DUST CUP
1
To empty dust cup, first remove the handheld vacuum from
the wand by pressing the Wand Release button and pulling
up on the handheld vacuum. Position dust cup over a bin,
then open the bottom of the dust cup by pressing the Dust
Cup release button on the side.
CLEANING PRE-MOTOR FILTER
(ONCE A MONTH)
To clean the foam filter, remove the filter cover lid on the top of the handheld vacuum and slide
off the foam filter. Rinse foam filter and filter frame with water. Tap loose dirt off filter between
washes as needed. Once foam filter is completely dry, return it to the filter frame, then replace
the filter frame and the filter cover.
CLEANING HEPA FILTER
*
(ONCE A YEAR)
To clean the HEPA filter, remove the cover on the bottom of the handheld vacuum by pressing
the release button. Remove HEPA filter. Rinse with water. Once completely dry, reinsert the
HEPA filter and close the filter cover lid.
HEPA FILTER
*
Only with certain models.
FOAM FILTER
FILTER FRAME
FILTER COVER LID
IMPORTANT:
To prevent damage, rinse filters with lukewarm water ONLY.
DO NOT use soap. Allow filters to air-dry for at least 24 hours before replacing
them in the vacuum to prevent liquid from being drawn into electric parts.
REPLACING FILTERS:
The
Pre-Motor Filter Kit
(Foam & Filter frame) should
be replaced every 2.5 years,
and the
HEPA
Filter should
be replaced every 3 years,
subject to frequency of use.
